Product Price :Get Latest Price
Product BrochureProduct Details:No of Fan Frame | 3 nos. |
Heating & Humidity sensor | 1 set |
Dampers - 350 mm Dia. (Wall mounted) | 6 pcs |
Damper Actuator | 2 pcs |
Main door hydraulic lifter | 1 no. |
Inspection Door (1.2 m x 0.6m) | 1 pc |
Water spray valve for thermic fluid | 1 pc |
Moisture probe box | 1 no. |
Moisture banana plug | 16 nos. |
Motorised Heating Valve- 3-Way (thermic fluid use), 40 mm | 1 pc |
No. of Fan motor with impeller 3 KW | 3 nos. |
Heating Battery with 9 fin tubes x 4.8 m length | 1 no. |
Hydraulic piston with tank | 1 no. |
Main Aluminum Door (5.5 W x 3.3 H (m)) | 1 set |
TX2000N Automatic Kiln Controller c/w 4 MC points | 1 no. |
Aluminum Sub-ceiling | 20 sq.m |
Water Mist Humidification Pump | 1 set |
Stainless Steel Spray Line with Nozzles - Dia. 3/4" | 1 lgth |
Electrical Panel for 3 fans | 1 no. |
Product Price :Get Latest Price
Product BrochureProduct Details:Material | Wooden Dryer |
Brand | Kalyan |
Electrical Panel for 4 fans | 1 no. |
Heating Battery with 12 fin tubes x 3.2 m length | 2 nos. |
Damper Actuator | 2 pcs |
Moisture probe box | 1 no. |
Heating & Humidity sensor | 1 set |
No of Fan frame | 4 nos. |
Moisture banana plug | 16 nos. |
Hydraulic piston with tank | 1 no. |
Dampers - 350 mm Dia. (Wall mounted) | 8 pcs |
Aluminum Sub-ceiling | 38 sq.m |
Water Mist Humidification Pump | 1 set |
Motorised Heating Valve- 3-Way (thermic fluid use), 40 mm | 1 pc |
Water spray valve for thermic fluid | 1 pc |
Main door hydraulic lifter | 1 no. |
Main Aluminum Door (7.2 W x 4.0 H (m)) | 1 set |
Inspection Door (1.2 m x 0.6m) | 1 pc |
TX2000N Automatic Kiln Controller c/w 4 MC points | 1 no. |
Stainless Steel Spray Line with Nozzles - Dia. 3/4" | 1 lgth |
No. of Fan motor with impeller 3 KW | 4 nos. |
Summary of supply for 2000 CFT Timber Kiln Dryer using Thermic Fluid Heater
2000CFT KILN DRYER
Dimensions 7.2 W x 7.2 D x 5.2 H (m)
STACKING CAPACITY
Dimensions 7.2 W x 5.4 D x 3.7 H (m)
TIMBER KILN DRYER CAPACITY 2000CFT (KALYAN MAKE) Summary of supply for 2000 CFT Timber Kiln Dryer using Steam Boiler
2000CFT KILN DRYER
Dimensions 7.2 W x 7.2 D x 5.2 H (m)
STACKING CAPACITY
Dimensions 7.2 W x 5.4 D x 3.7 H (m)
Product Price :Get Latest Price
Product BrochureProduct Details:Saw Arbor Motor | 7.5 HP |
Dust collector hole x suggest power | 125 mm (5") x 5 HP |
Machine size (LxWxH) | 1950 x1265 x1430mm |
Saw Arbor Bore | 50.8 (2") |
Feed Drive Motor | 1 HP |
Height of Saw Arbor | Adjustable |
MODEL | SA-12 |
Packing Dimensions | 1990x1305x1530 mm |
Table Dimension | 1700 x800 mm |
Max. cutting thickness | 85mm |
Sawblade Dia. | 305mm(12") |
Saw Arbor Speed | 4200rpm(50Hz) |
Feed Speed | 11~26m/min |
Link Chain Lubrication System | Standard |
Product Price :Get Latest Price
Product BrochureProduct Details:Link Chain Lubrication System | Standard |
No. of pressure Roller | 6 (7th Optional) |
Table Width at Left of Saw Blade | 335mm |
MODEL | KI-YFR-303S |
Table width at right of saw blade | 440mm |
Dust exhaust diameter | 5" |
Saw blade diameter | 200-305mm |
Feed drive motor | 1HP (2hp optional) |
Feed speed (3 speeds) | 15/ 20/ 25 M/min |
Distance from saw blade to machine frame | 400mm |
Width of chain block | 140mm |
Gross weight | 1050 kgs |
Maximum working thickness | 85 mm |
Saw arbor motor | 10HP |
Saw arbor speed | 4200 rpm |
Height of Saw Arbor | Adjustable |
Table Dimensions | 1253 x 780mm |
Packing dimensions. | 1660x1010x1360mm |
Net weight | 900 kgs |
Saw Arbor Diameter | 25.4mm |
Product Price :Get Latest Price
Product BrochureProduct Details:Gross weight | 650 kgs |
Machine dimensions (LxWxH) | 1680x1840x1150mm |
Packing dimensions (LxWxH) | 1700x780x1400mm |
Maximum tenon cut Length | 152 mm |
Maximum tenon cut Thickness | 127 mm |
Spindle Diameter Cope spindle | 1" |
Saw & tenon head | 5 HP |
Tenon spindle | 3400 RPM |
Cope head | 3 HP |
Cope spindle | 3600 RPM |
Saw blade | 2800 RPM |
Sliding table area | 1280x450 mm |
Net weight | 530 kgs |
Max. shaping cutter size | 10" |
Spindle Diameter Saw spindle | 1 1/4" |
Spindle Diameter Tenon spindle | 1 1/4" |
MODEL | ST-152A |
Maximum tenon cut Width | 370 mm |
Max. tenoning cutterhead size | 110 (dia.) 152 mm (long) |
Max. sawblade diameter | 12" |
Having Top & Bottom adjustable Tenon heads, Cut Off Saw, Cope Head, Sliding table with extendable Alluminum Ruler. The machine is complete with required motor and one set of Saw Blade/ Cutter.
Product Price :Get Latest Price
Product BrochureProduct Details:Working Air pressure | 5~6 kg cm |
Packing Dimensions (LxWxH) | 1430 x 1340 x 1450 mm |
Max. Mortise Width | 120 mm |
Cutter Oscillation Motor | 1 2 HP |
Max. Mortise Depth | 50 m/m |
Max. Clamping Thickness | 4 |
Net Weight | 700 kg |
Gross Weight | 800 kg |
MODEL | MOM-130 |
Table Vertical Adjustment | 3 |
Spindle Speed | 9500 R.P.M. |
Cutter Oscillation Speed | 6.6~400 strokes/min |
Spindle Motor | 3 HP |
Machine Dimensions (LxWxH) | 1300 x 1200 x 1200 mm |
Complete with following features : -
• Electric Control Panel.
• Required Electric motor.
Product Price :Get Latest Price
Product BrochureProduct Details:MODEL | KI-HP-118 |
Depth of Tenon | 10~30 mm |
Spindle Speed | 21,500 rpm |
Working Pressure | 5 kg /cm2 |
Dust Hood Outlet | Dia 100 mm |
Width of Tenon | 6~18 mm |
Cutter Spindle Vertical Adjustment | 30 mm. |
Packing dimensions (LxWxH) | 1550x970x1410mm |
Net Weight | 480 kg |
Gross Weight | 570 kg |
Thickness of Tenon | 7~60 mm |
Cutter Chucking Capacity | Dia 12 mm |
Workpiece Clamping Cylinders | 4 pcs. |
Machine Dimensions (LxWxH) | 1330x850x1200 mm |
Maximum Workpiece size | 1500m. (L)x480 (w) |
Complete with following features :-
• The special design fully eliminates cutter loosening problems
while increasing cutter service life.
• Exclusively employs collet chuck for clamping the cutter with
assures a more secure clamping.
• The cutting transmission belt is side mounted providing
convenient belt replacement.
• Tenon / mortise height & depth are fast and accurate to adjust.
• Individual scale permits accurate reading for adjustment amount.
• The tenon / mortise can be produced in continuous or skip cutting
mode.
• Electric Control Panel.
• Required motors.
Product Price :Get Latest Price
Product BrochureProduct Details:Table Area(LxWxH) | 2850x508x105mm |
Max. Planing Width | 508mm |
Cutterhead dia. | 107 mm |
Model | CM-505E |
Fence Slant | 0-45 Degree |
Motor | 5HP/3PH |
Cutterhead Speed | 5000R.P.M. |
CUTTER:Helical Cutter Head | (14x14x2.0mm - Blade Size) |
Machine Weight | 730kgs |
G.W. | 800kgs |
Packing Size | 3048x991x1016mm |
Table Height(Angle) | 800mm |
Product Price :Get Latest Price
Product BrochureProduct Details:3rd Left Vertical Spindle | 10 HP |
Elevation | 3/4 HP |
Top Horizontal Spindle | 110- 200 mm |
Spindle Cutting Speed | 6200 RPM (50 HZ) |
Adjustment range of Vertical Spindle | 45 mm |
Adjustment range for infeed table and edge -jointing fence | 10mm |
Net Weight | 2950 kgs. |
Gross Weight | 3450 kgs. |
First Bottom Horizontal Spindle | 100~160 mm |
Feed Roller Diameter | 140 mm |
Working Width | 18-230 mm |
Packing Dimensions (LxWxH) | 351x201x211 cm |
MODEL | KI-BL4-23 |
1st Bottom Horizontal Spindle | 7.5 HP |
Adjustment range of Horizontal Spindle | 35 mm |
Dust Outlet Diameter | 150 mm |
Feed Speed | 7-28 m/min |
Working Thickness | 6-125 mm |
Min. Working Length | 200 mm |
2nd Right Vertical Spindle | 7.5 HP |
Feed | 5 HP |
Right Vertical Spindle | 110~180 mm |
Left Vertical Spindle | 110~200 mm |
Feed Roller Width | 2x50 mm |
Moulding Spindle Number | 4 |
Pneumatic Pressure for Feed Rollers, Max | 6 bar (87 psi) |
Spindle Diameter | 40 mm |
Infeed Table | 2 M |
Product Price :Get Latest Price
Product BrochureProduct Details:Feed Speed | 6 m/min. |
Packing Size (LxWxH) | CF-18: 870x690x750mm /180Kg |
Net Weight | 65 Kg |
Gross Weight | 90 Kg |
MODEL | CF-18 |
Range of Working Dia. | 6 to 18 mm |
Range of Working Length | 240 mm ~ Unlimited |
Drive Motor | 1 HP |
Machine Size (LxWxH) | 560x440x580 mm |
Specifications:
MODEL |
CF-18 |
Range of Working Dia. |
f6 to f18 mm |
Range of Working Length |
240 mm ~ Unlimited |
Drive Motor |
1 HP |
Feed Speed |
6 m/min. |
Machine Size (L×W×H) |
560×440×580 mm |
Packing Size (L×W×H) |
620×500×750mm |
Packing Size (L×W×H) |
CF-18: 870×690×750mm /180Kg |
Net Weight |
65 Kg |
Gross Weight |
90 Kg |
Product Price :Get Latest Price
Product BrochureProduct Details:Sanding Belt Size | 6" x 25" |
Sponge Wheel Size | 1" x 4" x 6" |
Machine Size | 101 x 40x 95 cm |
MODEL | GS-306EW |
Machine Motor | 3HP/3PH/2P/4P |
Spindle Speed | 50 HZ 2800 / 1400 RPM |
Product Price :Get Latest Price
Product BrochureProduct Details:Machine Motor | 2HP / 3 PH |
Sponge Wheel Size | 1" x 4" x 6" |
MODEL | GS-106 |
Spindle Speed | 50HZ 580/830/1250/1900 RPM |
Sanding Belt Speed | 180/260/390/580 M/MIN |
Sanding Belt | 6" x 25" |
Worktable Size | 500 x 500mm |
Worktable Tilt | 45" |
Machine Size | 70 x 50 x 103 cm |
Product Price :Get Latest Price
Product BrochureProduct Details:Main spindle diameter | 40 mm |
Feeding motor | 4kw/5.5HP |
1st Upper Shaft | 125-180 |
Working table length | 1700 |
Feeding speed | 6-36 |
MODEL | KI-M4-23 |
Main spindle revolution | 6500 r/min |
Air pressure | 0.6 Mpa |
Right vertical spindle | 5.5kw/7.5HP |
1st Lower Shaft | 125 |
Feeding wheel diameter | 140 mm |
Working Width | 25-230 |
Working Thickness | 8-150 |
Feeding beam lifting | 0.55kw/0.75HP |
Total power | 28.55kw/37.3HP |
Left vertical spindle | 125-180 |
Dust Outlet Diameter | 140 mm |
Product Price :Get Latest Price
Product BrochureProduct Details:Dust hood outlet diameter | 6" X 2 |
Gross weight (approx.) | 3000 kgs. |
MODEL | KI-DSP-635 |
Max. working width | 635 mm ( 25'') |
Motor | 20hp,15hp,3hp,1/2hp |
Minimum thickness of cut | 10 mm |
Cutter-head speed | 5000 rpm |
Maximum thickness of cut | 200 mm |
Minimum length of cut | 310 mm |
Variable feed speed | 8-24 m/min-inverter |
Spiral cutter head (TCT knife size) | 15x15x2.5mm)-top and bottom digital readout |
Packing size | 270x116x180 CM--pallet |
Net weight (approx.) | 2880 kgs. |
Product Price :Get Latest Price
Product BrochureProduct Details:MODEL | KI-BS-24 |
Table Work Height | 765 mm |
Saw Blade Width | 38 mm to 80 mm |
Gross Weight | 500 Kgs. |
Motor | 3 HP / 5 HP |
Max. Cutting Width (W/o Fence) | 460 mm |
Machine Size | 1980x1100x860 mm |
Net Weight | 450 Kgs. |
Wheel Speed | 620rpm |
Wheel Diameter | 24" |
Table Size | 251 x 27" |
Cutting Work Height | 430 mm |
Saw Blade Length | 141/2" |
Blade thickness | 8 mm |
Product Price :Get Latest Price
Product BrochureProduct Details:MODEL | KI-PF-310 |
Max Motor Power | 6 kw |
Max. Heating Temperature | 2100C |
Max. Workpiece Length | 3100mm |
Workpiece Forming Height | 12-80 mm |
Min. Working Width | 200 mm |
Min. Entering Air Pressure | 0.7Mpa |
Machine Outline Size | 4200x750x1760mm |
Net Weight | 1400 kg |
POST FORMING MACHINE MODEL KI-PF-310
Complete with following features :-
• Electric Control Panel.
• PLC Arrangement.
• Required motor.
Product Price :Get Latest Price
Product BrochureProduct Details:Grinding wheel motor | 3 HP |
Machine size | 1200x1200x1450mm |
Packing size | 1500x1500x1550mm |
Cutter (dia. x W) | 203x200 mm |
Carbide knife (LxWxH) | 610x76x16 mm |
Router bits (Shank) | 13 mm |
N.W./G.W. | 750/820 kgs |
Carbide saw (dia. x T) | 76x600 mm |
Grinding wheel speed | 3400 rpm |
Coolant pump motor | 1/8 HP |
Product Price :Get Latest Price
Product BrochureProduct Details:Range of Working Length | 20 mm ~ 150 mm |
Capacity | 36 piece / min |
Packing Size (LxWxH) | 620x610x750mm |
Net Weight | 70 Kg |
Gross Weight | 100 Kg |
Model | CF-36 |
Range of Working Dia. | 6 ~ 18 mm |
Drive Motor | 1/2 HP |
Machine Size (LxWxH) | 560x500x580 mm |
Packing Size (LxWxH) | CF-18-CF36: 870x690x750mm /180Kg |
Additional Information:
Product Price :Get Latest Price
Product BrochureProduct Details:Cutting Height | 60~200 mm |
Kerf Loss | 1.1-1.25-1.4 mm |
Cutting Accuracy Under 120 mm height | +- 0.1 mm |
Suction performance per port | 30m/min, 1300 meter / hr |
Net Weight / Gross Weight | 2600 Kgs / 3000 Kgs. |
Applicable Blade Length | 500 mm |
Number of Strokes | 450 times / min |
Cutting Width | 160 mm |
Stroke of Frame | 210 mm |
Wood Height Tolerance | +- 0.5 mm |
Dust Collecting Hole | 5 x 100 mm |
Grinding frequency for saw blade | 15~25 times |
Blower | 2 HP |
Feed Speed | 0.3 ~ 1.5 M/min. |
Regrinding time for saw blade | Hardwood 4-8 hr / Softwood 8-10hr |
Number of Saw Blades | 25 pcs |
MODEL | MAC-15 |
Minimum Veneer Thickness | 2.0 mm |
Cutting Accuracy Over 120 mm height | +- 0.2 mm |
Compress Air | At least 6 bar, 87 pei |
Attached temperature controller | 4 sets |
LengthxWidthxHeight | 3400 x1300x2300mm |
Main Drive | 15 HP |
Length of timbers | At least 300 mm |
Explore More Products
© Kalyan Industries, Yamunanagar. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited