Kalyan Industries
Kalyan Industries
Send Email
0804896600386% Response Rate
Search

Home » Our Products » Solid Wood Machines


Solid Wood Machines

Our product range includes a wide range of two side thickness planner model ki- 2324, automatic copy shaper (ki-kl-28sf), high frequency edge glue press, high speed double surface planner model ki-rec-450a, double side planer model ki-dsp - 610 and straight line rip saw model ki-yrs-14.

Two Side Thickness Planner Model KI- 2324

REQUEST CALLBACK

Two Side Thickness Planner Model KI- 2324
  • Two Side Thickness Planner Model KI- 2324
  • Two Side Thickness Planner Model KI- 2324
  • Two Side Thickness Planner Model KI- 2324
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
Working Width25 inches
Cutting Depth9 mm
Feed Speed30 FPM
MODELKI- 2324
Max planning width610 mm / 24"
Max. working thickness150 mm / 6"
Min. working thickness9 mm
Min. length of work piece for thickening254 mm / 10"
Feeding Speed24 (feet per minute)
Cutter block diameter95 / 3.75"
Cutter block speed (RPM)4000 rpm
Standard cutter block3B-W
Size of dust collection port100 / 4"
Upper Roll Power required7.5 HP / 1440 rpm
Bottom Roll Power required5 HP / 1440 rpm
Thickness Table Up-Down Power required0.5 HP / 1440 rpm
Approx. Weight750 kg.

TWO SIDE THICKNESS PLANNER MODEL KI- 2324Complete with following features : -
• With electrical and accessories. 
• Straight cutter.
Yes! I am Interested

AUTOMATIC COPY SHAPER (KI-KL-28SF)

REQUEST CALLBACK

AUTOMATIC COPY SHAPER (KI-KL-28SF)
  • AUTOMATIC COPY SHAPER (KI-KL-28SF)
  • AUTOMATIC COPY SHAPER (KI-KL-28SF)
  • AUTOMATIC COPY SHAPER (KI-KL-28SF)
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
ModelKI-KL-28SF
Maximum cutting width165 mm
Minimum cutting length300 mm
Table diameter18"
Cutter spindle diameter30 mm
Follower roller diameter100mm
Table speeds1.5~4.0RPM (4 speeds)
Cutter spindle speed9000 RPM
Table drive motor1HP
Cutter head drive motor7.5 HP
Working air pressure required70PSI(5.0kg/cm2)
Net Weight1050 Kgs.
Gross Weight1250 Kgs.
Packing Size210x170x211 cm

Complete with following features : -

 

•  Single Spindle.

•  Designed for small part machining.

•  Cutting Capacity Dia. 6”.

•  Powerful 7½ hp motor drive.

•  4 steps table speed 1.5-4.0 rpm

•  Induction switches under table allows
   accurate cutting for complicated profiles.

•  Cutting head feed is driven by air /
   hydraulic cylinder for stable cutting
   motions.

•  Sanding attachment is optional.

•  PLC controller for convenient operation.

•  Auto feed continuously, save manpower
   massively, and greatly saving machining
   time.

 

Yes! I am Interested

HIGH FREQUENCY EDGE GLUE PRESS

REQUEST CALLBACK

HIGH FREQUENCY EDGE GLUE PRESS
  • HIGH FREQUENCY EDGE GLUE PRESS
  • HIGH FREQUENCY EDGE GLUE PRESS
  • HIGH FREQUENCY EDGE GLUE PRESS
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
Capacity40 L
MODELKGW-1030H
Input power3 415V
High Frequency Power30 KW, Max.: 35 KW
Transmitting Tube8T25RA CANON (Made in Japan)
H.F. AdjustorHand Wheel Adjustor
High Tension TransformerAC 8000V, DC10000V. 40KVA (Made in Taiwan)
RectifierPatented, High Tension Resistance, Full Wave (Made in Taiwan)
Variable CapacitorPatented, 4 Pc. One Set (Made in Taiwan)
Work RangeMax. 1220X2440X10~60mm
Pressure Apply5 hp. Hydraulic System (Made in Taiwan)
Pressure WayUpper and Side Pressure
CylindersUPx3 Pc. / Sidex12 Pcs. (Made in Taiwan)
Inlet Feeding TableMotor drive chained-pusher (Made in Taiwan)
Dimension LxWxH7600 x 2200 x 2100mm
Net Weight4580 kgs.
Gross Weight4950 kgs.
PackageWooden Pallet, 20' Container, Plastic coverage

HIGH FREQUENCY EDGE GLUE PRESS
Yes! I am Interested

HIGH SPEED DOUBLE SURFACE PLANNER MODEL KI-REC-450A

REQUEST CALLBACK

HIGH SPEED DOUBLE SURFACE PLANNER MODEL KI-REC-450A
  • HIGH SPEED DOUBLE SURFACE PLANNER MODEL KI-REC-450A
  • HIGH SPEED DOUBLE SURFACE PLANNER MODEL KI-REC-450A
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
Working Width20 inches
Cutting Depth9 mm
Feed Speed8-25 M/min
MODELKI-REC-450A
Max Working Width455mm (18")
Max Working Thickness200mm (8")
Min Working Thickness8 mm
Min Working Length310mm (12-1/2")
Table Area21" x 108"
Numbers Of Knife125mm
Spiral Cutter Head30x12x1.5mm
Cutter Head Speed4800 R.P.M.
Top Cutter Head Motor15 HP
Bottom Cutterhead Motor7.5 HP
Feeding Motor2 HP
Elevation Motor1/2 HP
Air Suction150x2 holes
Machine Dimensions2810x940x1720mm
Net Weight2600 Kgs.
Gross Weight2800 Kgs.

Size 450 MM. complete with following features :
• Inverter for variable speed for the feed.
• Spike Conveyor for Positive Feeding.
• Hard-chrome plated table.
• The planning-knife can be replaced quickly.
• Quick belt tension adjustment.
• Automatic Lubrication System
• Electrical Panel.
• Electric Motor.
• Spiral Cutter, the precisely machined helical 
   cutter head provides an extremely smooth,
   low noise cut.
• Digital display of the table position, Adopting
  digital control to control the working 
  thickness automatically.
Yes! I am Interested

DOUBLE SIDE PLANER MODEL KI-DSP - 610

REQUEST CALLBACK

DOUBLE SIDE PLANER MODEL KI-DSP - 610
  • DOUBLE SIDE PLANER MODEL KI-DSP - 610
  • DOUBLE SIDE PLANER MODEL KI-DSP - 610
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
Working Width25 inches
Cutting Depth9 mm
Feed Speed25 FPM
MODELKI-DSP - 610
Maximum width of cut610 mm
Minimum thickness of cut8 mm
Cutter-head speed5000 rpm
Maximum thickness of cut200 mm
Minimum length of cut250 mm
Dust hood outlet diameter5" X 2
Variable feed speed8-24m/min-inverter
Spiral cutter head (TCT knife size)15x15x2.5mm)-top and bottom digital readout
Packing size230x116x180 CM--pallet
Net weight2200 Kgs
Gross weight2350 Kgs
Motor15hp,10hp,2hp,1/2hp

Complete with following features
• Variable speed for the feed.
• Stepless feeding speed adjustment.
• Spike Conveyor for Positive Feeding.
• Hard-chrome plated table.
• The flat planning-knife can be replaced quickly.
• Quick belt tension adjustment.
• Lubricator.
• Electrical Panel.
• Electric Motor.
• Spiral Cutter, the precisely machined helical cutter head provides   an extremely smooth, low noise cut.• Digital display of the table position, Adopting digital control to   control the working thickness automatically.
Yes! I am Interested

STRAIGHT LINE RIP SAW MODEL KI-YRS-14

REQUEST CALLBACK

STRAIGHT LINE RIP SAW MODEL KI-YRS-14
  • STRAIGHT LINE RIP SAW MODEL KI-YRS-14
  • STRAIGHT LINE RIP SAW MODEL KI-YRS-14
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
MODELKI-YRS-14
Maximum working thickness75mm
Saw blade diameter355mm / 14"
Saw Arbor Diameter50.8mm / 2"
Saw arbor speed10~25/50Hz
Variable (m/min)10~29/60Hz (Opt 11-32mm)
Feed drive motor3 HP
Feed speed2850 rpm / 50Hz, 3600rpm / 60Hz
Height of Saw ArborAdjustable
Distance from saw blade to machine frame500 mm
Table Dimensions1665 x 1020 mm
Packing dimensions.1850x1130x1700 mm
Net weight1000 Kgs.
Gross Weight1250 Kgs.
Power20 HP
Saw arbor motor10 HP

                                                           
Complete with following features : -
• Maximum Working Thickness 75mm.
• The rip saw is equipped with a powerful motor assuring extremely
   smooth cutting.• The series of rip saw is ruggedly constructed for outstanding cutting    stability.• Variable feed speed allows for cutting all types of wood material.• Track chain conveyor ensures high straight accuracy.• An optional laser marking unit will upgrade cutting efficiency.• The sturdy frame and rigid construction of the machine enables it to
   be continuously operated for a long duration.• Laser Gun (Range: 2-3M)• Auto Pneumatic Attachment for Fence
Yes! I am Interested

KI-163A Bottom Straight Line Rip Saw

REQUEST CALLBACK

KI-163A Bottom Straight Line Rip Saw
  • KI-163A Bottom Straight Line Rip Saw
  • KI-163A Bottom Straight Line Rip Saw
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
Power15 HP
MODELKI-163A
Cutting Thickness10-90mm
Max. Cutting width460mm
Min. Cutting length230mm
Max. saw blade diameter355-405mm
Main motor power9kw
Feeding motor power1.5kw
Total power10.5kw
Saw shaft diameter50.8mm
speed2930r/min
Feeding speed10-33m/min
Voltage380v
Working desk size1820x970mm
Dimensions2100x1600x1450mm
Packing size2200x1700x1550mm
Weight1100kgs.

<b>Complete with following features : -</b><br />&bull; Max. cutting thickness 90 mm.<br />&bull; Table Anti Kick Back Finger.<br />&bull; Automatic Lubrication Unit. <br />&bull; Required electric motors. <br />&bull; Laser Gun.&nbsp;&nbsp;&nbsp; <br />&bull; Tool Box. <br />&bull; Auto Pneumatic attachment for Fence &nbsp;<br />
Yes! I am Interested

DOUBLE SURFACE PLANNER MODEL DSPV-635

REQUEST CALLBACK

DOUBLE SURFACE PLANNER MODEL DSPV-635
  • DOUBLE SURFACE PLANNER MODEL DSPV-635
  • DOUBLE SURFACE PLANNER MODEL DSPV-635
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
Working Width30 inches
Cutting Depth6 mm
Feed Speed25 FPM
MODELDSPV-635
Working thickness10-200 mm
Min. working length260 mm
Max. cutting depth6 mm
Cutting spindle dia.101 mm
Cutting spindle speed5800 r/min
Feeding speed8 - 18 m/min
Upper cutting spindle motor power15 HP
Bottom cutting spindle motor power10 HP
Feeding motor power3 HP
Lifting motor power0.75 HP
Dust exit dia.150 mm
Overall size2550x1130x1630mm
Net weight2530 Kgs.

DOUBLE SURFACE PLANNER MODEL DSPV-635Complete with following features :• Variable speed for the feed. • Spike Conveyor for Positive Feeding.• The planning-knife can be replaced quickly.• Quick belt tension adjustment.• Automatic Lubrication System• Electrical Panel.• Electric Motor.• Spiral Cutter, the precisely machined helical cutter head provides
  an extremely smooth, low noise cut.• Digital display of the table position, Adopting digital control to
   control the working thickness automatically
Yes! I am Interested

DOUBLE SIDE THICKNESS PLANNER MODEL DTPV-2063

REQUEST CALLBACK

DOUBLE SIDE THICKNESS PLANNER MODEL DTPV-2063
  • DOUBLE SIDE THICKNESS PLANNER MODEL DTPV-2063
  • DOUBLE SIDE THICKNESS PLANNER MODEL DTPV-2063
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
Type of MachineWood Cutting Machine
Motor Power5 HP
Automation GradeSemi Automatic
Processing Range5-150mm
Max. cutting depth6 mm
Overall size1335x1035x1310 mm
Min. working length220 mm
Upper cutting spindle motor power4 kw
Working thickness9-180 mm
Feeding motor power0.75 kw
Spindle speed5700 r/min
Feeding speed5 - 15 m/min
Max. working width630 mm
Working Table Size1310 x 634mm
MODELDTPV-2063
Net weight1080 Kgs.
Bottom cutting spindle motor power7.5 kw

DOUBLE SIDE THICKNESS PLANNER MODEL DTPV-2063          Complete with following features :• Spiral Cutter, the precisely machined helical cutter head provides
   an extremely smooth, low noise cut.• The planning-knife can be replaced quickly.• Electrical Panel.• Electric Motor.
Yes! I am Interested

DOUBLE SIDE PLANNER MODEL DSPV-610

REQUEST CALLBACK

DOUBLE SIDE PLANNER MODEL DSPV-610
  • DOUBLE SIDE PLANNER MODEL DSPV-610
  • DOUBLE SIDE PLANNER MODEL DSPV-610
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
Working Width15 inches
Cutting Depth6 mm
Feed Speed25 FPM
MODELDSPV-610
Working thickness9 - 200 mm
Min. working length300 mm (200mm-Opt.)
Max. cutting depthUpper Knife 5 mm Lower Knife 5 mm
Cutting spindle dia.101 mm
Cutting spindle speed5000 r/min
Feeding speed3 - 24 m/min
Upper cutting spindle motor power15 HP
Bottom cutting spindle motor power10 HP
Feeding motor power4 HP
Weight2450 Kgs.

DOUBLE SIDE PLANNER MODEL DSPV-610Complete with following features :• Variable speed for the feed. • Spike Conveyor for Positive Feeding.• The planning-knife can be replaced quickly.• Quick belt tension adjustment.• Automatic Lubrication System• Electrical Panel.• Electric Motor.• Spiral Cutter, the precisely machined helical cutter head provides
   an extremely smooth, low noise cut.• Digital display of the table position, Adopting digital control to
   control the working thickness automatically
Yes! I am Interested

STRAIGHT LINE RIP SAW (BOTTOM) MODEL SLRV-163AS

REQUEST CALLBACK

STRAIGHT LINE RIP SAW (BOTTOM) MODEL SLRV-163AS
  • STRAIGHT LINE RIP SAW (BOTTOM) MODEL SLRV-163AS
  • STRAIGHT LINE RIP SAW (BOTTOM) MODEL SLRV-163AS
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
MODELSLRV-163AS
Cutting Thickness10-80mm
Max. Cutting width470mm
Min. Cutting length230mm
Max. saw blade diameter355 mm
Main motor power12 HP
Total power14 HP
Saw shaft diameter50.8mm
Feeding speed10-33m/min
Working desk size1750x900mm
Dimensions1980x2060x1330mm
Weight950kgs.
Power15 HP
Feeding motor power2 HP

STRAIGHT LINE RIP SAW (BOTTOM) MODEL SLRV-163AS                        Complete with following features : -• Max. cutting thickness 80 mm.• Table Anti Kick Back Finger.• Automatic Lubrication Unit. • Required electric motors. • Laser Gun. • Tool Box. 
Yes! I am Interested

KI-630A Double Side Planner

REQUEST CALLBACK

KI-630A Double Side Planner
  • KI-630A Double Side Planner
  • KI-630A Double Side Planner
  • KI-630A Double Side Planner
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
Cutting Depth6 mm
Feed Speed30 FPM
Power5 HP
Planing Width18 Inch
Country of OriginMade in India
Working width10-630mm
MODELKI-630A
Working thickness9-200mm
Min. working length310 (200) mm
Max. cutting depth5mm down 5 mm
Cutting spindle dia.100mm
Spiral Cutter Head30x12x1.5mm
Cutting spindle speed5000r/min
Feeding speed3-30m/min
Upper cutting spindle motor power15kw
Bottom cutting spindle motor power7.2 kw
Feeding motor power2.2 kw
Lifting motor power0.37kw
Total power25.07kw
Dust exit dia.2x 150mm
Overall size2650x1150x1800mm
Packing size2750x1250x1900mm
Net weight2600 Kgs.

<b>Complete with following features :</b><br />&bull; Variable speed for the feed. <br />&bull; Spike Conveyor for Positive Feeding.<br />&bull; The planning-knife can be replaced quickly.<br />&bull; Quick belt tension adjustment.<br />&bull; Automatic Lubrication System<br />&bull; Electrical Panel.<br />&bull; Electric Motor.<br />&bull; Spiral Cutter, the precisely machined helical cutter head provides <br />&nbsp;&nbsp; an extremely smooth, low noise cut.&bull; Digital display of the table position, Adopting digital control to <br />&nbsp; control the working thickness automatically
Yes! I am Interested

KI-610A Double Side Planner

REQUEST CALLBACK

KI-610A Double Side Planner
  • KI-610A Double Side Planner
  • KI-610A Double Side Planner
  • KI-610A Double Side Planner
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
Cutting Depth12 mm
Feed Speed25 FPM
Power7 HP
Planing Width13 Inch
Working width10-610mm
MODELKI-610A
Working thickness9-200mm
Min. working length300 (200) mm
Max. cutting depth5mm down 5 mm
Cutting spindle dia.100mm
Spiral Cutter Head30x12x1.5mm
Cutting spindle speed5000r/min
Feeding speed3-24m/min
Upper cutting spindle motor power11kw
Bottom cutting spindle motor power7.5 kw
Feeding motor power2.2 kw
Lifting motor power0.37kw
Total power21.07kw
Dust exit dia.2x 150mm
Overall size2650x1150x1800mm
Packing size2650x1150x1800mm
Net weight2600 Kgs.

<b>Complete with following features :</b><br />• Variable speed for the feed. <br />• Spike Conveyor for Positive Feeding.<br />• The planning-knife can be replaced quickly.<br />• Quick belt tension adjustment.<br />• Automatic Lubrication System<br />• Electrical Panel.<br />• Electric Motor.<br />• Spiral Cutter, the precisely machined helical cutter head provides <br />   an extremely smooth, low noise cut.• Digital display of the table position, Adopting digital control to <br />   control the working thickness automatically
Yes! I am Interested

DOUBLE SIDE PLANNER MODEL KI-630A

REQUEST CALLBACK

DOUBLE SIDE PLANNER MODEL KI-630A
  • DOUBLE SIDE PLANNER MODEL KI-630A
  • DOUBLE SIDE PLANNER MODEL KI-630A
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
Cutting Depth12 mm
Feed Speed30 FPM
Power7 HP
Planing Width20 Inch
Working width10-630mm
MODELKI-630A
Working thickness9-200mm
Min. working length310 (200) mm
Max. cutting depth5mm down 5 mm
Cutting spindle dia.100mm
Spiral Cutter Head30x12x1.5mm
Cutting spindle speed5000r/min
Feeding speed3-30m/min
Upper cutting spindle motor power15kw
Bottom cutting spindle motor power7.2 kw
Feeding motor power2.2 kw
Lifting motor power0.37kw
Total power25.07kw
Dust exit dia.2x 150mm
Voltage380v
Overall size2650x1150x1800mm
Packing size2750x1250x1900mm
Net weight2600 Kgs.

Complete with following features :
• Variable speed for the feed.
• Spike Conveyor for Positive Feeding.
• The planning-knife can be replaced quickly.
• Quick belt tension adjustment.
• Automatic Lubrication System
• Electrical Panel.
• Electric Motor.
• Spiral Cutter, the precisely machined helical cutter head provides     an extremely smooth, low noise cut.• Digital display of the table position, Adopting digital control to      control the working thickness automatically
Yes! I am Interested

DOUBLE SIDE PLANNER MODEL KI-610A

REQUEST CALLBACK

DOUBLE SIDE PLANNER MODEL KI-610A
  • DOUBLE SIDE PLANNER MODEL KI-610A
  • DOUBLE SIDE PLANNER MODEL KI-610A
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
MODELKI-610A
Working thickness9-200mm
Working width10-610mm
Min. working length300 (200) mm
Max. cutting depth5mm down 5 mm
Cutting spindle dia.100mm
Spiral Cutter Head30x12x1.5mm
Cutting spindle speedCutting spindle speedCutting spindle speed5000r/min
Feeding speed3-24m/min
Upper cutting spindle motor power11kw
Bottom cutting spindle motor power7.5 kw
Feeding motor power2.2 kw
Lifting motor power0.37kw
Total power21.07kw
Dust exit dia.2x 150mm
Voltage380v
Overall size2650x1150x1800mm
Packing size2650x1150x1800mm
Net weight2600 Kgs.

Complete with following features :
• Variable speed for the feed.
• Spike Conveyor for Positive Feeding.
• The planning-knife can be replaced quickly.
• Quick belt tension adjustment.
• Automatic Lubrication System
• Electrical Panel.
• Electric Motor.
• Spiral Cutter, the precisely machined helical cutter head provides   an extremely smooth, low noise cut.• Digital display of the table position, Adopting digital control to   control the working thickness automatically
Yes! I am Interested

HIGH SPEED STRAIGHT LINE RIP SAW MODEL SA-18

REQUEST CALLBACK

HIGH SPEED STRAIGHT LINE RIP SAW MODEL SA-18
  • HIGH SPEED STRAIGHT LINE RIP SAW MODEL SA-18
  • HIGH SPEED STRAIGHT LINE RIP SAW MODEL SA-18
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
MODELSA-18
Gluing Length Range200 - 2500mm
Max. cutting thickness120
Sawblade Dia.355~455mm (14"~18")
Saw Arbor Bore50.8 (2")
Saw Arbor Motor15HP (20 HP optional)
Saw Arbor Speed3000rpm (50Hz), 3600rpm (60Hz)
Feed Drive Motor2 HP (Opt. 3HP)
Feed Speed11~28m/min (50Hz),
Height of Saw ArborAdjustable
Link Chain Lubrication SystemStandard
No. of Presser Roller / Size8 Pcs / 70 mm
Distance from Saw Blade to Machine Frame660mm
Table Dimension2000 x 1160 mm
Table width at left of Saw Blade460mm
Table width at right of Saw Blade700mm
Dust collector holex suggest power125 mm (5") x 5 HP
Machine size (LxWxH)2300 x1760 x1680 mm
Net Weight1700 Kgs.
Gross Weight2000 Kgs.

Complete with following features : -
• Max. cutting thickness 120 mm.
• Table Anti Kick Back Finger.
• Automatic Lubrication Unit.
• Required electric motors.
• 14” Saw Blade.
• Laser Gun.   
• Tool Box.
• AUTO PNEUMATIC ATTACHMENT FOR FENCE
Yes! I am Interested

STRAIGHT LINE RIP SAW MODEL KI-153B

REQUEST CALLBACK

STRAIGHT LINE RIP SAW MODEL KI-153B
  • STRAIGHT LINE RIP SAW MODEL KI-153B
  • STRAIGHT LINE RIP SAW MODEL KI-153B
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
ModelKI-153B
Working Thickness5-85mm
Max. Saw Blade Dia.305mm
Max. Working Width360mm
Min. Working Length200mm
Voltage380v
Spindle speed3750r/min
Feeding Speed13.3-23.3m/min
Total power8.25kw
Overall Size1750x980x1450mm
Weight930kg

Complete with following features : -
• Maximum Working Thickness 85mm
• Base is ruggedly fabricated to provide a solid foundation and   vibration free cutting.• End table swings downward and prevents short workpieces and   thin edgings from sliding.• Anti-kickback fingers provide maximum operator safety.
• The sawblade is easily accessed for replacement.
• Control panel located within easy reach position for operation   convenience.• The oil lubricator provides the correct amount of oil to lubricate   the track slide ways.• This machine produces accurate edge for high accuracy glue joint.
• Variable feed speed device.
• Feed speed: 13 to 23 M/min.
• Laser Gun.
Yes! I am Interested

STRAIGHT LINE RIP SAW MODEL KI-YRS-16

REQUEST CALLBACK

STRAIGHT LINE RIP SAW MODEL KI-YRS-16
  • STRAIGHT LINE RIP SAW MODEL KI-YRS-16
  • STRAIGHT LINE RIP SAW MODEL KI-YRS-16
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
MODELKI-YRS-16
Arbor motor10 HP / 15HP
Saw blade diameter14"-16"
Saw arbor diameter2"
Working thickness95 mm
Distance between saw & column560 mm
Spindle rotation2850/50Hz, 3600/60Hz
Feeding motor3 HP
Feeding speed10~25/50Hz
Variable (m/min)10~29/60Hz
Table size1720 x 1070 mm
Net weight1100 Kgs.
Gross weight1400 Kgs.
Packing dimensions (LxWxH)1920 x 1650 x 1750 mm

Complete with following features : -
• The rip saw is equipped with a powerful motor assuring   extremely  smooth cutting.• The series of rip saw is ruggedly constructed for outstanding       cutting stability.• Variable feed speed allows for cutting all types of wood material.• Track chain conveyor ensures high straight accuracy.
• An optional laser marking unit will upgrade cutting efficiency.
• The sturdy frame and rigid construction of the machine enables it     to be continuously operated for a long duration.• Laser Gun (Range: 2-3M)• AUTO PNEUMATIC ATTACHMENT FOR FENCE
Yes! I am Interested

KI-164A Bottom Rip Saw

REQUEST CALLBACK

KI-164A Bottom Rip Saw
  • KI-164A Bottom Rip Saw
  • KI-164A Bottom Rip Saw
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
MODELKI-164A
Cutting Thickness10-120mm
Max. Cutting width640mm
Min. Cutting length260mm
Max. saw blade diameter405-500mm
Main motor power11kw
Feeding motor power1.5kw
Total power12.5kw
Saw shaft diameter50.8mm
speed2930r/min
Feeding speed10-33m/min
Voltage380v
Working desk size2020x1170mm
Dimensions2260x1850x1450mm
Packing size2360x1950x1550mm
Weight1800kgs.

<b>Complete with following features : -</b><br />&bull; Max. cutting thickness 120 mm.<br />&bull; Table Anti Kick Back Finger.<br />&bull; Automatic Lubrication Unit. <br />&bull; Required electric motors. <br />&bull; Laser Gun.&nbsp;&nbsp;&nbsp; <br />&bull; Tool Box. <br />&bull; Auto Pneumatic attachment for Fence &nbsp;<br />
Yes! I am Interested

HYDRAULIC WIND MILL TYPE CLAMP CARRIER MODEL ACP-06650-100M-TH

REQUEST CALLBACK

HYDRAULIC WIND MILL TYPE CLAMP CARRIER MODEL ACP-06650-100M-TH
  • HYDRAULIC WIND MILL TYPE CLAMP CARRIER MODEL ACP-06650-100M-TH
  • HYDRAULIC WIND MILL TYPE CLAMP CARRIER MODEL ACP-06650-100M-TH
  • HYDRAULIC WIND MILL TYPE CLAMP CARRIER MODEL ACP-06650-100M-TH
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
Maximum clamp working length1270 mm
Machine working width2500 mm
Maximum clamp working thickness3~1/2" (90mm)
Gear reducer# 120-600 : 1
Drive motor1HP (0.75KW)

Complete with following features :-
• Machine with 6 sections.
• Every section 6 pcs of clamps. (Total 36pcs of clamps)
• The clamps made by the heavy gauge square tube steel, a heavy  
   duty loaded clamps and do not deform.
• Special device for the fore clamps and after clamps are not hook up
   each other during operation, avoid deform to the clamps’ hold steel
   beam,
• Special designed flexible hold-down bar or tube type hold-down bar,
   use to keep the thick stock, at least 15 mm thickness or wide 
   panels, not buckling or spring out from the clamps. It is the items 
   for option to purchase.•  Maximum clamp working length: 50" (1270mm )
•  Machine working width 100"( 2500mm )
•  Maximum clamp working thickness: 3-1/2" ( 90mm)
•  Gear reducer # 120 ~ 600:1
•  Drive motor 1HP ( 0.75KW)
•  Semi-auto rotate cycle operation.
•  1 set of air panel flattener.
•  1 set of hydraulic manual operate wrench tightener.
•  1 set of hydraulic motor 3HP x 1
Yes! I am Interested

Hydraulic Wind Mill Type Clamp Carrier Model: Acp-08650-100m-Th

REQUEST CALLBACK

Hydraulic Wind Mill Type Clamp Carrier Model: Acp-08650-100m-Th
  • Hydraulic Wind Mill Type Clamp Carrier Model: Acp-08650-100m-Th
  • Hydraulic Wind Mill Type Clamp Carrier Model: Acp-08650-100m-Th
  • Hydraulic Wind Mill Type Clamp Carrier Model: Acp-08650-100m-Th
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
Maximum clamp working length1270 mm (50")
Machine working width2500 mm(100")
Maximum clamp working thickness3~1/2" (90mm)
Gear reducer120-600 : 1
Drive motor1HP (0.75KW)
Compressed Air Pressure6 Kg / cm2
Compressor2.2 kw 480 liter/minute
From Front to rear side4220mm
From right to left side3600mm
Machine Height3630mm

Complete with following features : -
• Machine with 8 sections.
• Every section 6 pcs of clamps. (Total 48pcs of clamps)
• The clamps made by the heavy gauge square tube steel, a 
   heavy duty loaded clamps and do not deform.• Special device for the fore clamps and after clamps are not    hook up each other during operation, avoid deform to the
  clamps’ hold steel beam,• Special designed flexible hold-down bar or tube type hold-  down bar, use to keep the thick stock, at least 15 mm   thickness or wide panels, not buckling or spring out from the 
  clamps. It is the items for option to purchase.• Semi-auto rotate cycle operation.• 1 set of air panel flattener.
• 1 set of hydraulic manual operate wrench tightener.
• 1 set of hydraulic motor???3HP x 1
Yes! I am Interested

HYDRAULIC SEMI-AUTOMATIC TYPE CLAMP CARRIER MODEL ACP-08650-100M-QH

REQUEST CALLBACK

HYDRAULIC SEMI-AUTOMATIC TYPE CLAMP CARRIER MODEL ACP-08650-100M-QH
  • HYDRAULIC SEMI-AUTOMATIC TYPE CLAMP CARRIER MODEL ACP-08650-100M-QH
  • HYDRAULIC SEMI-AUTOMATIC TYPE CLAMP CARRIER MODEL ACP-08650-100M-QH
  • HYDRAULIC SEMI-AUTOMATIC TYPE CLAMP CARRIER MODEL ACP-08650-100M-QH
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
Maximum clamp working length1270 mm (50")
Machine working width2500 mm(100")
Maximum clamp working thickness3~1/2" (90mm)
Gear reducer120-600 : 1
Drive motor1HP (0.75KW)
Compressed Air Pressure6 Kg / cm2
Compressor2.2 kw 480 liter/minute
From Front to rear side4220mm
From right to left side3600mm
Machine Height3630mm

Complete with following features:-
• Machine with 8 sections.
• The clamps with the heavy gauge square tube steel, heavy
  duty and do note deform.• Special device for the fore clamps and rear clamps are not   hook up each other during rotation, avoid deform to the
  clamps angle beam.• Every section 6 pcs of clamps. (Total 48 pcs of clamps)• Semi-auto rotate cycle operation.
• 1 set of hydraulic tightening and pneumatic panel flattening
   carriage.• 1 set of hydraulic pump, each 3HP.
Yes! I am Interested

Radial Arm Saw Model KI-BS-888

REQUEST CALLBACK

Radial Arm Saw Model KI-BS-888
  • Radial Arm Saw Model KI-BS-888
  • Radial Arm Saw Model KI-BS-888
  • Radial Arm Saw Model KI-BS-888
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
Size12 inch
MODELBS-888
Motor4.5 HP
Motor Speed2900 rpm - 50 HZ
Bearing Rails8 pcs
Spindle Bore1" (25.4 mm)
Blade Dia14"(355mm)
Thickness of Cut12" (65mm) 14" (95mm)
Head Swive0 - 1800
Tilting0 - 900
Max Trimming Width1100 mm
Max Cross Cutting Length600 mm
Table Area L X W600x1100mm
Machine Size1120x1100x1170mm
Packing Size1140x940x790 mm
Net / Gross Weight200 / 240 kgs

Complete with following features : -
• The diameter of the blade is 14”.
• Maximum Cross Cutting length 620mm.
• Maximum Thickness of Cut is 105 mm.
• The machine is complete with 4.5HP motor.

Yes! I am Interested

FOUR SIDE MOULDER - 6 HEAD (TAIWAN MAKE) MODEL KI-BL6-23 (HEAVY DUTY)

REQUEST CALLBACK

FOUR SIDE MOULDER - 6 HEAD (TAIWAN MAKE) MODEL KI-BL6-23 (HEAVY DUTY)
  • FOUR SIDE MOULDER - 6 HEAD (TAIWAN MAKE) MODEL KI-BL6-23 (HEAVY DUTY)
  • FOUR SIDE MOULDER - 6 HEAD (TAIWAN MAKE) MODEL KI-BL6-23 (HEAVY DUTY)
  • FOUR SIDE MOULDER - 6 HEAD (TAIWAN MAKE) MODEL KI-BL6-23 (HEAVY DUTY)
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
Spindle Speed6000 RPM
Feed Speed7-36 M/min
Moulding Spindle Number6
Working Width18-230mm
Working Thickness6-125 mm
Min. working Length200mm
1st Bottom Horizontal Spindle7.5 HP
2nd Right Vertical Spindle7.5 HP
3rd left Vertical Spindle10 HP
Second top Horizontal Spindle10 HP
Bottom horizontal spindle10 HP
Feed7.5 HP
Elevation3/4 HP
First bottom horizontal spindle100~200mm
Right Vertical Spindle110~180mm
Left Vertical Spindle110~200mm
Top Horizontal Spindle110~200mm
Second bottom horizontal spindle100~250mm
Spindle Diameter40mm
Spindle Cutting Speed6200 rpm
Adjustment Range of Vertical Spindle45 mm
Adjustment range of Horizontal Spindle35 mm
Dust outlet diameter150 mm
Infeed Table2 M
Feed Roller Diameter140 mm
Feed Roller Width2 x50 mm
Pneumatic Pressure for Feed Rollers, Max.6 bar (87psi)
Adjustment range for infeed table and edge-jointing fence10 mm
Packing Dimensions (LxWxH)432x201x211cm
Net Weight4800 Kgs.
Gross Weight5400 Kgs.
Power8 HP

Complete with following features : -
• Size 230mm (width) x 125 mm (thickness).
• Hard Chromed Table.
• Without Cutter Head
• Required motors & electric panel.
Yes! I am Interested

Vertical Band Saw Machine KI-VBS-42

REQUEST CALLBACK

Vertical Band Saw Machine KI-VBS-42
  • Vertical Band Saw Machine KI-VBS-42
  • Vertical Band Saw Machine KI-VBS-42
  • Vertical Band Saw Machine KI-VBS-42
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
MaterialMild Steel
Table Size36 inch
Motor Power15 HP
MODELKI-VBS-42
Wheel Diameter1066mm (42")
Width of Wheel76mm
Size of Table1041 x 1092mm
Height from Floor to Table990mm
Depth of Cut787mm
Distance from Saw Blade to Frame965mm
HP. Required15 HP
Table tilt degreeNo
Speed of saw wheel575 RPM
Weight of the complete machine1650Kgs.

Vertical Band Saw Machine
Complete with C.I. body type but without electricals.

Yes! I am Interested

TF-700 Vertical Band Resaw

REQUEST CALLBACK

TF-700 Vertical Band Resaw
  • TF-700 Vertical Band Resaw
  • TF-700 Vertical Band Resaw
  • TF-700 Vertical Band Resaw
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
MaterialMild Steel
Table Size24 inch
Motor Power15 HP
MODELTF-700
Min. cutting thickness3mm
Distance from fence to blade185mm
Distance from feed roller to blade190mm
Height from the floor to the working table835mm
Cutting height320mm
Wheel diameter28"
Wheel width3-1/2"
Saw blade width4"
Saw blade length4850mm
Wheel drive motor20HP
Hydraulic pump motor2HP
Net weight1700kgs
Gross weight1900kgs
Packing dimensions228 x 138 x 225cm

<b>Complete with following features :<br />&bull; </b>Hydraulic system.<br />&bull; One feed rollers.<br />&bull; Leverage combined with counter-balance weight for&nbsp; <br />&nbsp;&nbsp; blade tension control featuring trouble free at all&nbsp; <br />&nbsp;&nbsp; times. Double feed rollers assures extra powerful <br />&nbsp;&nbsp; feeding of wood.<br />&bull; Variable feed speed.<br />&bull; Fence can be tilted 300.<br />&bull; Blade tension and tracking are adjusted by turning a <br />&nbsp;&nbsp; handwheel.<br />&bull; Bakelite saw guide ensures outstanding&nbsp; <br />&nbsp;&nbsp; wear resistance.<br />&bull; Bronze wheel cleaning plate.<br />&bull; Cast iron saw wheels with dynamically balanced.
Yes! I am Interested

Single End Tenoning Machine

REQUEST CALLBACK

Single End Tenoning Machine
  • Single End Tenoning Machine
  • Single End Tenoning Machine
Ask for Price

✓Thanks for Contacting Us.

Product Price :Get Latest Price

Product Brochure
Product Details:
Power5 HP
Automation GradeFully Automatic
MODELST-152A
Maximum tenon cut Length152 mm
Maximum tenon cut width370 mm
Maximum tenon cut Thickness127 mm
Max. tenoning cutterhead size110 (dia.) 152 mm (long)
Max. shaping cutter size10"
Max. sawblade diameter12"
Spindle Diameter Tenon spindle1 1/4"
Spindle Diameter Cope spindle1"
Spindle Diameter Saw spindle1 1/4"
Tenon spindle3400 RPM
Cope spindle3600 RPM
Saw blade2800 RPM
Saw & tenon head5 HP
Cope head3 HP
Sliding table area1280x450 mm
Net weight530 kgs
Gross weight650 kgs
Machine dimensions (LxWxH)1680x1840x1150mm
Packing dimensions (LxWxH)1700x780x1400mm

SINGLE END TENONNING MACHINE MODEL ST-152A (TAIWAN MAKE)

Having Top & Bottom adjustable Tenon heads, Cut Off Saw, Cope Head, Sliding table with extendable Alluminum Ruler.  The machine is complete with required motor and one set of Saw Blade/ Cutter.


 


Additional Information:

  • Item Code: ST-152-A
    • Yes! I am Interested

    Hydraulic Clamp Carrier (6 Row)

    REQUEST CALLBACK

    Hydraulic Clamp Carrier (6 Row)
    • Hydraulic Clamp Carrier (6 Row)
    • Hydraulic Clamp Carrier (6 Row)
    Ask for Price

    ✓Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Brochure
    Product Details:
    Maximum working thickness100 mm
    Maximum clamp working length1250 mm
    Machine working width2500 mm
    Oil pump power4 kw
    Reducer63
    Drive motor1.1 kw

    HYDRAULIC CLAMP CARRIER (6 ROW) (CHINA MAKE)
    Complete with following features :-
    • Machine with 6 sections.
    • Every section 6 pcs of clamps. (Total 36pcs of clamps).
    • Maximum clamp working length: 1250mm.
    • Machine working width: 2500mm.
    • Maximum clamp working thickness: 100mm.
    • Drive motor: 1.1 kw.
    • 1 set of air panel flattener.
    • 1 set of hydraulic manual operate wrench tightener.
    Yes! I am Interested

    HYDRAULIC CLAMP CARRIER (8 ROW)

    REQUEST CALLBACK

    HYDRAULIC CLAMP CARRIER (8 ROW)
    • HYDRAULIC CLAMP CARRIER (8 ROW)
    • HYDRAULIC CLAMP CARRIER (8 ROW)
    Ask for Price

    ✓Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Brochure
    Product Details:
    Maximum working thickness100 mm
    Maximum clamp working length1250 mm
    Machine working width2500 mm
    Oil pump power4 kw
    Reducer63
    Drive motor1.1 kw

    Complete with following features :-
    • Machine with 8 sections.
    • Every section 6 pcs of clamps. (Total 48pcs of clamps).
    • Maximum clamp working length: 1250mm.
    • Machine working width: 2500mm.
    • Maximum clamp working thickness: 100mm.
    • Drive motor：1.1 kw.
    • 1 set of air panel flattener.
    • 1 set of hydraulic manual operate wrench tightener.
    Yes! I am Interested

    RECTANGULAR TENONER DAD-115

    REQUEST CALLBACK

    RECTANGULAR TENONER DAD-115
    • RECTANGULAR TENONER DAD-115
    • RECTANGULAR TENONER DAD-115
    Ask for Price

    ✓Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Brochure
    Product Details:
    Power4 HP
    Automation GradeFully Automatic
    MODELDAD-115
    Speed6000 R.P.M.
    Max. Tenon Width115+2R mm
    With Standard Tool10-45 m/m
    Production Rate12 pcs/min.
    Upward0-15
    Downward0-30
    Side0-20
    Cutter Cycle1 HP
    Machine Dimensions (LxWxH)1760x1150x1320 mm
    Packing Dimension (LxWxH)1870x1240x1620 mm
    Net Weight1100 kgs.

    Complete with following features : -
    • Electric Control Panel.
    • Required Electric motor.

    Yes! I am Interested

    FOUR SIDE MOULDER - 5 HEAD (TAIWAN MAKE) MODEL KI-BL5-23 (HEAVY DUTY)

    REQUEST CALLBACK

    FOUR SIDE MOULDER - 5 HEAD (TAIWAN MAKE) MODEL KI-BL5-23 (HEAVY DUTY)
    • FOUR SIDE MOULDER - 5 HEAD (TAIWAN MAKE) MODEL KI-BL5-23 (HEAVY DUTY)
    • FOUR SIDE MOULDER - 5 HEAD (TAIWAN MAKE) MODEL KI-BL5-23 (HEAVY DUTY)
    Ask for Price

    ✓Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Brochure
    Product Details:
    Power5 HP
    Spindle Speed6000 RPM
    Number of Heads5
    Feed Speed7-28 m/min
    MODELKI-BL5-23
    Moulding Spindle Number5
    Working Width18-230 mm
    Working Thickness6-125 mm
    Min. Working Length200 mm
    1st Bottom Horizontal Spindle7.5 HP
    2nd Right Vertical Spindle7.5 HP
    3rd Left Vertical Spindle10 HP
    Bottom Horizontal Spindle10 HP
    Feed5 HP
    Elevation3/4 HP
    First Bottom Horizontal Spindle100~ 200 mm
    Right Vertical Spindle110~180 mm
    Left Vertical Spindle110~ 200 mm
    Top Horizontal Spindle110~200 mm
    Second Bottom Horizontal Spindle100~ 180 mm
    Spindle Diameter40 mm
    Spindle Cutting Speed6200 RPM (50 HZ)
    Adjustment range of Vertical Spindle45 mm
    Adjustment range of Horizontal Spindle35 mm
    Dust Outlet Diameter150 mm
    Infeed Table2 m
    Feed Roller Diameter140 mm
    Feed Roller Width2x50 mm
    Pneumatic Pressure for Feed Rollers, Max6 bar (87 psi)
    Adjustment range for infeed table and edge - jointing fence10mm
    Packing Dimensions (LxWxH)354x201x211 cm
    Net Weight3500 kgs.
    Gross Weight4000 kgs.

    Complete with following features : -
    • Size 230mm (width) x 125 mm (thickness).
    • Hard Chromed Table
    • Without Cutter Head
    • Required motors & electric panel.

    Additional Information:

  • Item Code: KI-BL5-23
    • Yes! I am Interested

    HIGH SPEED DOUBLE SURFACE PLANNER MODEL KI-REC-635A

    REQUEST CALLBACK

    HIGH SPEED DOUBLE SURFACE PLANNER MODEL KI-REC-635A
    • HIGH SPEED DOUBLE SURFACE PLANNER MODEL KI-REC-635A
    • HIGH SPEED DOUBLE SURFACE PLANNER MODEL KI-REC-635A
    Ask for Price

    ✓Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Brochure
    Product Details:
    Working Width25 inches
    Cutting Depth9 mm
    Feed Speed8-25 M/min
    MODELKI-REC-635A
    Max. working width635 mm (25'')
    Max. working thickness200 mm (8")
    Min. working thickness8 mm
    Min. working length310 mm
    Table area27"x108"
    Numbers of Knife125 mm
    Knife sizes of Spiral Cutter Head30x12x1.5 mm
    Cutter Head Speed4800 R.P.M.
    Top Cutter Head Motor15 HP
    Bottom cutter head motor10 HP
    Feeding motor3 HP
    Elevation motor1/2 HP
    Air suction150mm x 3 holes
    Machine Dim. (LxWxH)2910x1180x1830 mm
    Net weight (approx.)3100 Kgs.
    Gross weight (approx.)3300 Kgs.

    Size 635 MM. complete with following features :
    • Variable speed for the feed.
    • Stepless feeding speed adjustment.
    • Spike Conveyor for Positive Feeding.
    • Hard-chrome plated table.
    • The flat planning-knife can be replaced quickly.
    • Quick belt tension adjustment.
    • Lubricator.
    • Electrical Panel.
    • Electric Motor.
    • Spiral Cutter, the precisely machined helical cutter head provides    an extremely smooth, low noise cut.• Digital display of the table position, Adopting digital control to    control the working thickness automatically.
    Yes! I am Interested

    KI-HBS-42 Horizontal Band Saw

    REQUEST CALLBACK

    KI-HBS-42 Horizontal Band Saw
    • KI-HBS-42 Horizontal Band Saw
    • KI-HBS-42 Horizontal Band Saw
    Ask for Price

    ✓Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Brochure
    Product Details:
    MODELKI-HBS-42
    Size42"
    Size of Saw Wheels42" x 3" 16 Spokes
    Thickness of the Saw Wheel0.75"
    Distance between Pillars6' - 6"
    Maximum Cut5' - 3"
    Size of Carriage12'x3'-9" 6 Wheels with 4 Jaw Vice
    Channel Size10"
    Length of Rail60'
    Length of Saw Blade recommended32'
    H.P. Required20 HP + 2 HP +2 HP

    Having trolley 12' x 4' size, Rail 60'
    Complete with auto lifting arrangements & all standard accessories but without electricals



    Yes! I am Interested

    DOUBLE SIDE PLANNER MODEL DSPV-470A

    REQUEST CALLBACK

    DOUBLE SIDE PLANNER MODEL DSPV-470A
    • DOUBLE SIDE PLANNER MODEL DSPV-470A
    • DOUBLE SIDE PLANNER MODEL DSPV-470A
    Ask for Price

    ✓Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Brochure
    Product Details:
    Working Width13 inches
    Cutting Depth6 mm
    Feed Speed25 FPM
    MODELDSPV-470A
    Working thickness9 - 200 mm
    Min. working length300 mm (200mm-Opt.)
    Max. cutting depthUpper Knife 5 mm Lower Knife 5 mm
    Cutting spindle dia.100 mm
    Cutting spindle speed5000 r/min
    Feeding speed3 - 24 m/min
    Upper cutting spindle motor power10 HP
    Feeding motor power3 HP
    Total Power21 HP
    Packing Size2600x1050x1800mm
    Net Weight2350 Kgs.

    DOUBLE SIDE PLANNER MODEL DSPV-470AComplete with following features :• Variable speed for the feed. • Spike Conveyor for Positive Feeding.• The planning-knife can be replaced quickly.• Quick belt tension adjustment.• Automatic Lubrication System• Electrical Panel.• Electric Motor.• Spiral Cutter, the precisely machined helical cutter head provides
      an extremely smooth, low noise cut.• Digital display of the table position, Adopting digital control to
      control the working thickness automatically
    Yes! I am Interested

    TF-D180 Band Saw Blade Grinder

    REQUEST CALLBACK

    TF-D180 Band Saw Blade Grinder
    • TF-D180 Band Saw Blade Grinder
    • TF-D180 Band Saw Blade Grinder
    • TF-D180 Band Saw Blade Grinder
    Ask for Price

    ✓Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Brochure
    Product Details:
    MODELTF-D180
    Grinding wheel speed2100-2300 rpm (50 HZ)
    Motor1 HP
    N.W270 kgs
    G.W350 kgs
    Packing size112x80x97 cm

    Suitable for grinding blade of Band Re-Saw.complete with following features :
    • Grinding width 2” ~ 8”
    • Grinding pitch 19~38mm
    • Motor 1 hp ×1
    Yes! I am Interested

    AUTOMATIC FINGER JOINT SHAPER MODEL MXB3515A

    REQUEST CALLBACK

    AUTOMATIC FINGER JOINT SHAPER MODEL MXB3515A
    • AUTOMATIC FINGER JOINT SHAPER MODEL MXB3515A
    • AUTOMATIC FINGER JOINT SHAPER MODEL MXB3515A
    Ask for Price

    ✓Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Brochure
    Product Details:
    MODELMXB3515A
    Shaping thickness20-150mm
    Max. working width450mm
    Size of working table500x650mm
    Shaper spindle power11kw
    Hogger power4kw
    Hydraulic system power2.2kw
    Top& Bottom scoring saw power0.75kwx2
    Shaper spindle speed6750rpm
    Shaper spindle diameter50mm
    Total motor power18.7kw
    Overall dimensions3100x1650x1800mm

    • WITH GLUE SPREADER WITH TOP & BOTTOM SCORING SAW
    • Complete with required motor.   
    Yes! I am Interested

    RADIAL ARM SAW MODEL KI-BS-999

    REQUEST CALLBACK

    RADIAL ARM SAW MODEL KI-BS-999
    • RADIAL ARM SAW MODEL KI-BS-999
    • RADIAL ARM SAW MODEL KI-BS-999
    Ask for Price

    ✓Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Brochure
    Product Details:
    MODELBS-999
    Motor4.5 HP
    Motor Speed2900 rpm - 50 HZ
    Bearing Rails8 pcs
    Spindle Bore1" (25.4 mm)
    Blade Dia14"(355 mm) / 16"(405 mm)
    Thickness of Cut14" (95mm) 16" (120mm)
    Head Swiv0 - 180
    Head Tilt0 - 90
    Max Trimming Width1140 mm
    Max Cross Cutting Length14" (800mm) 16" (760mm) 18" (740 mm)
    Table Area L X W820x1140mm
    Machine Size1450x1250x1600 mm
    Packing Size1485x1075x790 mm
    Net / Gross Weight250 / 290 kgs

    Complete with following features : -
    • The diameter of the blade is 16”.
    • Maximum Cross Cutting length 900mm.
    • Maximum Thickness of Cut is 130 mm.
    • The machine is complete with 4.5 HP motor.
    Yes! I am Interested

    FOUR SIDE MOULDER - 5 HEAD MODEL KI-M5-23

    REQUEST CALLBACK

    FOUR SIDE MOULDER - 5 HEAD MODEL KI-M5-23
    • FOUR SIDE MOULDER - 5 HEAD MODEL KI-M5-23
    • FOUR SIDE MOULDER - 5 HEAD MODEL KI-M5-23
    Ask for Price

    ✓Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Brochure
    Product Details:
    MODELKI-M5-23
    Working Width25-230
    Working Thickness8-100
    Working table length1700
    Feeding speed6-36
    Main spindle diameter40 mm
    Main spindle revolution6500 r/min
    Air pressure0.6 Mpa
    Right vertical spindle5.5kw/7.5HP
    Feeding beam lifting0.55kw/0.75HP
    Feeding motor4kw/5.5HP
    Total power34.05kw/46.26HP
    1st Lower Shaft125
    Right Vertical spindle125- 180
    Left vertical spindle125-180
    1st Upper Shaft125-180
    2nd Upper Shaft125- 200
    Feeding wheel diameter140 mm
    Dust Outlet Diameter140 mm

    Complete with following features : -
    • Required motors & electric panel.
    Yes! I am Interested

    Heavy Duty Automatic Copy Shaper

    REQUEST CALLBACK

    Heavy Duty Automatic Copy Shaper
    • Heavy Duty Automatic Copy Shaper
    • Heavy Duty Automatic Copy Shaper
    • Heavy Duty Automatic Copy Shaper
    Ask for Price

    ✓Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Brochure
    Product Details:
    Machine RequiredCutting Machine
    Automation GradeFully Automatic
    Size13 Inch
    ModelKI-KL-80AS
    Maximum Cutting Circle80"
    Minimum Cutting Circle20"
    Maximum Rectangle (2.1)71"x35"
    Table Diameter64"
    Cutter Spindle Diameter30 mm
    Follower Roller Diameter100 mm
    Table Speeds0.4~4.0RPM (DC variable)
    Cutter Spindle Speed9,000RPM
    Table Drive Motor2 HP (DC)
    Cutter Head Drive Motor10HPx2
    Sanding Motor5HPx1
    Size of Sanding Belt2,820 mm
    Working Air Pressure Required70PSI(5.0kg/cm2)
    Net Weight4,200kgs
    Gross Weight4,500kgs

    Complete with following features : -            
    • Double Spindles.
    • Single sanding unit.
    • Design for big parts machining.
    • Table is driven by a DC Motor providing variable speed 0.4 – 4
       rpm to suit various cutting conditions.
    • Powerful 15 hp × 1 and 10 hp× 1 motor drive.
    • Induction switches under table allows accurate cutting for
       complicated profiles. 
    • Cutter head feed is driven by air / hydraulic cylinder for stable
       cutting motions, 
    • PLC controller for convenient operation.   
    • Sanding attachment is optional
    Yes! I am Interested

    Conveyorized Glue Applicator Model KI-ACP-168

    REQUEST CALLBACK

    Conveyorized Glue Applicator Model KI-ACP-168
    • Conveyorized Glue Applicator Model KI-ACP-168
    • Conveyorized Glue Applicator Model KI-ACP-168
    Ask for Price

    ✓Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Brochure
    Product Details:
    Capacity15 L
    Automation GradeSemi Automatic
    Width12" (300mm)
    In-feed conveyor length8' (2440 mm)
    Out-feed conveyor length8' (2440 mm)
    Working width of glue roll12" (300mm)
    Main motor1/2HP : 50 : 1
    Working speed8.5m per minute

    Conveyorized Glue Applicator
    Model - KI-ACP-168
    With Electrical & Accessories.


    Yes! I am Interested

    View More

    Looking for Solid Wood Machines ?
    X
    Our Products





    Explore More Products

    Contact Us

    Contact via E-mail
    Contact via SMS
    Jagmohan Singh (Partner)
     Kalyan Industries
    Kalyan Industries, Jagadhri Road, Opp Punjab And Sind Bank
    Yamuna Nagar - 135001, Haryana, India
    Call Us: 
    Call Response Rate: 86%
    Share Us :
    FTL


    Company Presentation

    Company Video

    Company Brochure


    Home  |   Profile   |  Our Products  |  Site Map  |   Contact Us

    © Kalyan Industries. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Kalyan Industries