Plywood Machinery

Product Price :Get Latest Price

Product Price :Get Latest Price

Product Price :Get Latest Price

Vener Dryer 10 Section 3 Decks

Kalyan Roller Track Veneer Dryer is meant for drying the Core Veneer & Face Veneer and is the Dryer of choice all over the country as well as abroad.  Veneer Dryer is available in various sizes and different configurations from 4 Sections 3 Decks to 16 Sections 4 Decks.  Kalyan Veneer Dryer is the most economical dryer available because it consumes much lower power as compare to the any other brand.  Our Jet Ventilated Roller Track Veneer Dryer can run on Steam as well as Thermic Fluid.

All specifications,dimensions & design characteristic are subject to change without priornotice.

Product Price :Get Latest Price

Product Price :Get Latest Price

Product Price :Get Latest Price

LOG PEELING LATHE MACHINE MODEL K.I.I.-1400

With the following features:

•  Hydraulically Operated Back Up Rollers.

•  Having capacity to take 10’ girth.

•  Compressor with its 2 HP motor.

•  Power Pack with its 3 HP motor.

•  Electric Control Panel.

•  Gear Box.

•  Pneumatic clutch & Brake system for the
    Main Drive.

•  Pneumatic Brake for the tightening of Log.

•  Machine will be without knife & electric
   motors i.e.  40 HP for Main Drive + 3HP for
   the movement of the Spindles + 3 HP for 
   the movement of the carriage.

• The dia. of left over roller is f1⁵/₈” ~ 2”.

Product Price :Get Latest Price

Vener Dryer 12 Section 4 Decks

Kalyan Roller Track Veneer Dryer is meant for drying the Core Veneer & Face Veneer and is the Dryer of choice all over the country as well as abroad.  Veneer Dryer is available in various sizes and different configurations from 4 Sections 3 Decks to 16 Sections 4 Decks.  Kalyan Veneer Dryer is the most economical dryer available because it consumes much lower power as compare to the any other brand.  Our Jet Ventilated Roller Track Veneer Dryer can run on Steam as well as Thermic Fluid.

Product Price :Get Latest Price

FOUR ROLLER GLUE SPREADER MACHINE

•  Four roller glue spreader machine,

•  Consisting of 2 nos. rubber covered
   grooved Rollers and 2 nos. Doctor Rollers.

•  Without Electrical & Motor.

Specifications:

Product Price :Get Latest Price

Product Price :Get Latest Price

FULLY AUTOMATIC PLC LONG CORE COMPOSER MODEL - HTCC/Z-1300

•  Front Clipper & Jointer with infeed       
   conveyor.

•   Out feed Veneer Clipper with conveyor.

•   Auto Stacker Unit.

•   The machine is supplied with PLC     
     Control &
     required motors & panel.

•   Machine having 7 Strings i.e. can join 
     veneer at 7 different positions.

•   Highly strengthened thread, improve
    product horizontal tensile force
    flexibility, no break.

•   Edge Gluing.

•   Servo motor (Siemens make) for       
     infeed.

•   Servo motor (Siemens make) for 6 
    Nos. Chain Conveyor for joining unit.

•   German Make Rotary Cylinder / for
    Glue applying Fingers.

•   Delta make PLC.

• Taiwan Make electromagnetic Clutch
   Brake.

Specifications:

All specifications, dimensions & design characteristic are subject to change without prior notice.

Product Price :Get Latest Price

HEAVY DUTY HIGH SPEED DEBARKING MACHINE MODEL 1300-RDZ/H

Complete with following features : - 

•  Very heavy duty machine.

•  High Speed.

•  With required motors.

•  Hydraulic Power Pack.

•  With Knife.

Specification:

Product Price :Get Latest Price

CNC SPINDLELESS ROTARY PEELING HEAVY DUTY MODEL KI-SPRL-1350-WCL/HD  (KALYAN MAKE)

Complete with following features : - 

•  Clipper Outside.

•  Required Motors.

•  Knife.

•  Servo Motor Drive for feed.

•  Servo Motor Drive for clipper.

•  Conveyor on the exit side - to take out the
    veneer after being cut in the required size
    by clipper.

 Specifications:

All specifications, dimensions & design characteristic are subject to change without prior notice.

Additional Information:

Product Price :Get Latest Price

LOG   PEELING   LATHE   MACHINE HYDRAULIC - PNEUMATIC OPERATIVE MODEL K.I.I.–2750 [RGB]

With the following features:

•  Having capacity for peel log of length
   2700mm.

•  Hydraulically Operated Back Up Rollers.

•  Having capacity to peel 16' girth.

•  Compressor (Anest Iwata / Elgi Make)
    with its 3 HP motor.

•  Power Pack with its 3HP x 3 Nos. motor.

•  Electric Control Panel.

•  Heavy duty Gear Box in place of
   conventional Lorry's Gear Box to
   compensate the torque.

•  A/c Frequency Variable Drive for
   variable speed. 

•  Pneumatic clutch system for the Main
   Drive.

•  Ball Screw Nuts in place of
   Conventional feed screws which 
   ensure no backlash resulting in
   smooth & uniform thickness of
   veneer.

•  Pneumatic Brake for the tightening of Log.

•  Machine will be with knife & electric
   motors i.e. 100H.P. for Main Drive + 5
   HP x 2 for the movement of the Spindles +
   5 H.P. for  the movement of the carriage.

Specifications:

Product Price :Get Latest Price

DEBARKING MACHINE SUITABLE FOR  SPINDLELESS ROTARY PEELING SIZE 2750MM

•  Very heavy duty machine specially
   designed for hardwood logs.

•  With required motors.

•  Hydraulic Power Pack.

•  Manual knife clamping.

•  With Knife.

All specifications, dimensions & design characteristic are subject to change without prior notice. 

Product Price :Get Latest Price

Specifications:

Product Price :Get Latest Price

Widely demanded in wood processing industries, this Veneer Band Dryer is an ideal option for removing moisture from veneer. The offered dryer is designed and manufactured by our ingenious professionals using premium quality components and progressive techniques in line with set international standards. Also, provided dryer is rigorously checked on set quality parameters to ensure its quality. Clients can purchase this Veneer Band Dryer from us in several designs and technical specifications within budgeted costs.

Features:

• Reliable operation

   

• Longer service life

   

• Energy efficient

   

• Unmatched performance

  Our range also includes:

• Veneer Band Dryer 2 Section 2 Decks

• Veneer Band Dryer 3 Section 2 Decks

• Veneer Band Dryer 4 Section 2 Decks

• Veneer Band Dryer 5 Section 2 Decks

• Veneer Band Dryer 6 Section 2 Decks

• Veneer Band Dryer 7 Section 2 Decks

• Veneer Band Dryer 8 Section 2 Decks 

Product Price :Get Latest Price

AUTO VENEER JOINING / SPLICING PRESS  MODEL VPJ- 130

Complete with following features : -

•  With required motors & electrical panel.

•  Stable pressing force.

•  Short Bonding time as short as 20 ~ 25
    second or one cycle in 30 ~ 35 second.

•  Auto temperature control & auto
   positioning of Core Veneer.

•  Adjustable length 600 ~ 1300 mm.

• Capable of joining end less / Continues
   length of Core Veneer.

•  Cutting by the clipper to any length i.e. upto
   8’ Situated at the rear end of the machine
   (In Built).

•  Machine is completed with stacker / scissor
    lift.

•  One operator can work on two machines.

•  One Grinding machine can feed core veneer
   for 4 sets of joining / splicing presses.

•  Shortest length of core veneer can be
    jointed as small as 200 mm.

Specifications:

All specifications, dimensions & design characteristic are subject to change without prior notice.

Product Price :Get Latest Price

AUTOMATIC PLYWOOD DOUBLE SIZER MODEL NO. ZX - 4x8- SZ

Complete with following features : - 

•  The sliding table driven by motor /
    reducer.

•  The sliding table having variable feed
   speed.

•  The machine is equipped with Laser Gun
   which enhance the accuracy of the edge
   cutting.

•  Stacker having Scissor Lift.

•  With Electrical motors & panel (All major
   electrical components are of SCHNIEDER
   make)

•  The feed motor is servo.

Specifications:

Product Price :Get Latest Price

Product Price :Get Latest Price

Product Price :Get Latest Price

HIGH SPEED HEAVY DUTY SPINDLELESS ROTARY PEELING MACHINE WITH SERVO MOTOR MODEL 1300-HBZ / DD

Complete with following features : -

•  Can peel upto 400 mm diameter.

•  Double Drive System for Double Rows of
    Rollers (2 Motors).

•  2 Nos. Motors for Pressure Bar rollers.

•  Veneer outfeed speed 45 ~ 120 m/min.

•  Inbuilt Clipper.

•  Log Punch System.

•  Heavy Duty Gear Box.

•  Servo Motor for the feed drive as well for
    clipper.

•  Required Motors.

•  Conveyor belt on the exit side - to take out
   the veneer after being cut in the required
   size by clipper.

Specifications:

All specifications are subject to change without prior notice. 

Product Price :Get Latest Price

Product Price :Get Latest Price

GLUE SPREADER MACHINE SIZE 2700MM LONG  (CHINA MAKE)

With the following features :

•  Variable Frequency Drive for Rollers (VFD).

•  Stainless Steel Glue Tank.

•  Outfeed Disc Conveyor Table.

•  Having 2 nos. Rubber Rollers and 2 nos.
   Hard Chromed Rollers with out-feed
   conveyor,

•  Required motors & Panel. 

•  The machine has the provisions to adjust
   the gap of rollers Pneumatically.

Specifications:

All specifications, dimensions & design characteristic are subject to change
without prior notice.

Product Price :Get Latest Price

• Sliding Table driven by Motor & Gear Box.
• This model facilitate the cutting of plywood of the size 3' to 4' width wise and 6' to 7' length wise optional model for 2.5' to 4' & 5' to 8' also available.
• Machine is equipped with servo motors for better results.
• Front clamp for better holding of the plywood resulting in accurate sizes & quality.   
• CNC panel equipped with Delta Display System.
• Electrical panel is having internals made by Schnieder/L&T.
• The sliding table having variable feed speed.
• The machine is equipped with Laser Gun which enhances the accuracy of edge cutting.
• Stacker is having scissor lift.
• This machine has got approx. 28 seconds cycle.
• This machine is fabricated out of tested material.
• This machine is equipped with scoring saw prior to main saw.

Product Price :Get Latest Price

HIGH SPEED HEAVY DUTY SPINDLELESS ROTARY PEELING MACHINE MODEL HAVING TWO SPEEDS WITH SERVO MOTOR MODEL 1300-BDW

Complete with following features : -  

•  Can peel upto 500 mm diameter.

•  Veneer outfeed two speed 45~ 100
   m/min.

•  Inbuilt clipper.

•  Log Pusher for Centering.

•  Log Punch System.

•  Heavy Duty Gear Box.

•  Servo Motor.

•  Required Motors.

•  Conveyor belt on the exit side - to take out
    the veneer after being cut in the required 
    size by clipper.

Specifications:

All specifications, dimensions & design characteristic are subject to change without prior notice. 

Product Price :Get Latest Price

HIGH SPEED HEAVY DUTY SPINDLELESS ROTARY PEELING MACHINE WITH SERVO MOTOR MODEL 1300-HBH / DD

Complete with following features : -

•  Can peel upto 400 mm diameter.

•  2 Nos. Servo Motors for Double Drive
    System for Double Rows of Rollers.

•  2 Nos. Servo Motors for Pressure Bar
    rollers.

•  Servo Motor for the feed drive.

•  Veneer outfeed speed 45 ~ 150 m/min.

•  Servo Motor for Inbuilt Clipper.

•  Log Punch System.

•  Heavy Duty Gear Box.

•  Required Motors.

•  Conveyor belt on the exit side - to take out
    the veneer after being cut in the required
    size by clipper.

 Specifications:

Product Price :Get Latest Price

PEELING KNIFE GRINDER MACHINE 1400MM

With the following features :-

•  Fitted with Water Tank.

•  Reduction Gear Box.

•  Coolant Pump.

•  Required Electric Motor.

Specifications :

All specifications, dimensions & design characteristic are subject to change without prior notice.

Product Price :Get Latest Price

PNEUMATIC WET VENEER CLIPPER 1400MM

With the following features :-

•  Cuts veneer Pneumatically. 

•  Heavy Duty cutting capacity.

•  Front & Back Conveyor Table.

•  Required electric Motors.

(The machine is without Compressor.)

REELING AND UNREELING UNIT

With the following features :-

•  6 Nos. Rollers.

•  Auto Reeling Machine with trolley and 
   required motor.

•  Roller Stand / Track.

PNEUMATIC WET VENEER CLIPPER 2750MM

With the following features :-

•  Cuts veneer Pneumatically. 

•  Heavy  Duty cutting capacity.

•  Front & Back Conveyor Table.

•  Required electric Motors.

(The machine is without Compressor.)

Reeling and Unreeling Unit                                

Required for two number of Pneumatic clippers

With the following features :-

•  Trolley to collect the Scrap and Falli.        1      set

•  40’ Reeling Trolley’s Rail.                          1      set

•  Auto Reeling Machine with Trolley,           1     set

    required motor & Taping Attachment.

•  12 Nos. Rollers.                                         

    2 Nos. Roller Stand / Track.   

Product Price :Get Latest Price

8' FOUR-ROLLER DOUBLE SIDES GLUE SPREADER

With electrical & accessories.

Specifications.

Product Price :Get Latest Price

Product Price :Get Latest Price

GUILLOTINE JOINTER MACHINE 1400MM

With the following features :-

•  Heavy Duty Single Cut.

•  Hydraulically Operated.  

•  Having cutting capacity from 75 to 100mm
   Bunch

•  Automatic Braking Arrangement with the
   help of Magnetic Brakes.

•  One No. Cutting Knife.

•  Hydraulic Power Pack.

•  Required Electric Motor.

 GUILLOTINE JOINTER MACHINE 
 2700MM

With the following features :-

•  Heavy Duty Single Cut.

•  Hydraulically Operated.  

•  Having cutting capacity from 75 to 100mm
   Bunch

•  Automatic Braking Arrangement with the
   help of Magnetic Brakes.

•  One No. Cutting Knife.

•  Hydraulic Power Pack.

•  Required Electric Motor. 

 Specifications:

All specifications, dimensions & design characteristic are subject to change without prior notice.

Product Price :Get Latest Price

ZIG ZAG SPLICER MODEL ZC 900MM (CASATI MAKE)

for jointing the edge of veneer length wise by the means of glue thread.  The machine is supplied with one thread spool, tweezers, needles & anti adhesive liquid product.

Specifications:

Product Price :Get Latest Price

ZIG ZAG SPLICER MODEL ZZ-900  (CHINA MAKE)

•  With Electrical.

 Specifications:

Product Price :Get Latest Price

VENEER EDGE GRINDER – DOUBLE SIDE MODEL – DEG 130

Complete with following features : -

•  With required motors & electrical panel.

•  Strong Structure having chain transmission
   & adjustable chain conveyors which runs
   throughout, holds the veneer from top &
   bottom while grinding / scarfing takes place
   thus ensuring the stable grinding / beveling.

•  Grinding station / Heads can tilt / Incline to
   Grinding / Scarf / Beveling of edges of the
   Core Veneer.

• Can scarf / grind length of the Core Veneer
   from 700 ~ 1300 mm.

•  2 Nos. Grinding Heads on the either side of
   the machine i.e. total 4 Grinding Heads.

•  The grinding head can be adjusted
   according to the thickness of core veneer.

Specifications:

Product Price :Get Latest Price

LOG PEELING LATHE MACHINE MODEL K.I.–1400

With the following features:

•  Having capacity to take 10’ girth.  

•  Gear Box fitted with Pneumatic Clutch.

•  Compressor with motor.

Specifications:

All specifications are subject to change without prior notice.

Product Price :Get Latest Price

CORE DRYING PRESS SIZE 9 X 4

Complete with following features : -  

•  Steam heating system

•  Side cylinders for closing & opening of day
    lights.

•  With electrical & accessories.

Specifications:

All specifications, dimensions & design characteristic are subject to change without prior notice.

Product Price :Get Latest Price

ZIG ZAG SPLICER MODEL ZZ-1300

(CHINA MAKE)

•  With Electrical.

Specifications:

Product Price :Get Latest Price

FULLY AUTOMATIC PLC LONG CORE COMPOSER MODEL - HTCC/Z-1300

•  Front Clipper & Jointer with infeed       
    conveyor.

•   Out feed Veneer Clipper with conveyor.

•   Auto Stacker Unit.

•   The machine is supplied with PLC     
     Control & 
     required motors & panel.

•   Machine having 7 Strings i.e. can join  
     veneer at 7 different positions.

•   Highly strengthened thread, improve 
    product horizontal tensile force 
    flexibility, no break.

•   Edge Gluing.

•   Servo motor (Siemens make) for       
     infeed.

•   Servo motor (Siemens make) for 6  
    Nos. Chain Conveyor for joining unit.

•   German Make Rotary Cylinder / for 
    Glue applying Fingers.

•   Delta make PLC.

• Taiwan Make electromagnetic Clutch 
   Brake.

Specifications:

All specifications, dimensions & design characteristic are subject to change without prior notice.

Product Price :Get Latest Price

With the following features:

•  Size 8’x4’.    

•  Having 500 Tonne capacity.

•  Hydraulic Valves “Yuken”.

•  Specially for Pre-Pressing of the plywood.

•  Chain Conveyor & Pusher

•  Power Pack

•  Electric Control Panel.                           

•  Required motors.

•  All major electricals - Siemens / Schneider /
   Omron

Product Price :Get Latest Price

640 TONNE HYDRAULIC HOT PRESS 8’X4’ (CHINA MAKE)

•  15 day lights in Heavy Duty Structure
    having 4 Gates. 

•  LOADING AND UNLOADING UNIT. 

    (Auto  è Hanging Type).

•  Hydraulic Valves “Yuken”.

•  Rexroth Pump (High Pressure).

•  Automatic Power Pack.

•  Electric Control Panel & Motors.

•  All major electricals - Siemens / Schneider /
   Omron..

•  Motors – “CE Certified”

Specifications :

All specifications, dimensions & design characteristic are subject to change without prior notice