Kalyan Industries, Yamunanagar
Kalyan Industries, Yamunanagar


Modular Furniture Machines

We leverage on our vast industrial expertise in the fabrication of our exclusive gamut of Modular Furniture including Sliding Table Panel Saw with Driven Scorer, Auto Panel Saw / Beam Saw, Computerized Panel Saw, Single Sided Edge Bander and others. These are high in performance, low on maintenance and are stringently checked for precision, durability, quality and flawlessness.



Auto Panel Saw

Auto Panel Saw / Beam Saw

We are available with Auto Panel Saw / Beam Saw that are durable, sturdy, corrosion resistant, dimensionally accurate and easy to operate. These are fabricated using best grades of raw material and are in high demand all across the globe. These are available in different model options and specification choices including maximum length of cut, machine dimensions and others. 

Auto Panel Saw / Beam Saw
  • Model PRO–8
  • Model PRO–10
  • Model PRO–12

Specifications:
Model PRO - 8 PRO-10 PRO-12
Max. Length of Cut 2650mm 3250mm 3850mm
Spindle Motor 13 HP 13 HP 13 HP
Carriage Drive 3 HP 3 HP 3HP
Spindle Saw Blade 14” Dia 14” Dia 14” Dia
Spindle Diameter 1” 1” 1”
Spindle Speed 4800 rpm 4800 rpm 4800 rpm
Pre-Scoring Saw Blade 160mm Dia 160mm Dia 160mm Dia
Pre-Scoring Spindle Diameter 1” 1” 1”
Pre-Scoring Spindle Speed 6500 rpm 6500 rpm 6500 rpm
Max. Cutting, Height 80mm 80mm 80mm
Feed Forward Speed 12-16-21-26m/min. 12-16-21-26m/min. 12-16-21-26m/min
Retract Speed 24-32-42-52m/min. 24-32-42-52m/min. 24-32-42-52m/min
From Floor to Table Height 820mm 820mm 820mm
Compressed Air Required 5.5 kg/cm2 5.5 kg/cm2 5.5 kg/cm2
Machine Net Weight 2200 kg 2400 kg 2600 kg
Machine Dimension 5235×3350×1830 5845×3350×1830 6430×3350×1830
Pallet Gross Weight 2600 Kg 2900 Kg 3200 Kg
All specifications, dimensions & design characteristic are subject to change without prior notice.


Electronic Beam Panel Saws

Available Models:

• Explorer 3200 P
• Explorer 4300 P


Manual Edge Banding Machine

Backed by our team of adept professionals, we offer a wide assortment of Manual Edge Banding Machines. These are precision designed and are available in models KI-SEB-207 and KI-SEB-207 T. These come in specifications such as thickness for workpiece 10-40mm, angle for tilting working table 600 – 400, thickness of edge banding 0.3-3mm and minimum radius of curved edging 20mm.

Our range is offered in the following models:

Manual Edge Banding Machine
Model KI-SEB-207

Specification:
ModelKI-SEB-207
Size for Fixed Working Table1000×725mm 1000×560mm
Thickness for Workpiece10-40mm
Angle for Tilting Working Table600 - 400
Thickness of Edge Banding0.3-3mm
Min-radius of Curved Edging20mm
Heating Power2.4kw
Motor Power0.37kw
Weight320 kg
Outline Measure1600×965×1150mm
All specifications, dimensions & design characteristic are subject to change without prior notice.


Portable Edge Bander

Complete with following features : -

Large straight or curved panel custom works.

Portable or stationary machine applications.

One man manual edge banding operation.

Digital Temperature Control

 

Specifications:

Tape Thickness

0.4 - 3 mm

Width of Tape

16 - 65 mm

Feeding Speed

3.6 m/min (60Hz)

4.0 m/min (50 Hz)

Total Power

765 W, 1 Phase

Glue Working Temperature

1200c – 2000c

Glue Pot Capacity

400 ml

Machine Net Weight

8.1 kg

Packing Size

525x345x455 mm

All specifications, dimensions & design characteristic are subject to change without prior notice.


Edge Trimming Buffing & End Cutting

Our Edge Trimming, Buffing & End Cutting are meticulously designed and reflect the advanced process technologies used in the fabrication. These are highly efficient and are appreciated worldwide owing to durability, excellent finish and flawless functionality standards. Our Edge Trimming, Buffing & End Cutting machines can also be customized in form of thickness of panel, thickness of belt, revolving speed for trimming and motor power for trimming.

Edge Trimming, Buffing & End Cutting


Specification:
Thickness of Panel 12-50mm
Thickness of belt 0.5-5mm
Revolving speed for trimming 8000rpm/min
Motor power for trimming 0.6kw
Revolving speed for end cutting 8000rpm/min
Motor power for end cutting 0.6kw
Revolving speed for buffing 2800rpm/min
Motor power for buffing 0.6kw
Machine outline size 1000x700x800mm
Net weight 160kg.
All specifications, dimensions & design characteristic are subject to change without prior notice.


Corner Rounder

CORNER ROUNDER Model CR10 (Paoloni - Italian Make)

Specifications:
Panel thickness (min/max)10/50 mm
Cutterhead rotation speed24000 rpm
Pneumatic motor power0,37 Kw
Wide (T.C.T) cutter? 30mm Z2 R=2mm
Widia (T.C.T) cutter? 30mm Z2 R=3mm
Extraction outlet diameter100 mm
Compressed air(95 PSI) 6, 5 bar
Overall dimensions780x720x1250mm
Weight100 kg
All specifications, dimensions & design characteristic are subject to change without prior notice.


Single Sided Edgebander

We offer a qualitative gamut of single sided edge bander that are available in models b 10, b10/p-12, b10/p-21, b10/p-22 and b10/p-31. Further they have a feed rate of 9 m/1', panel thickness of 10-50 mm, minimum panel length of 110 mm, min panel width (with min. Length 220) 60 mm and minimum space between two panels is 650 mm.

Single Sided Edgebander b3 (paoloni-italian make)
  • gluing unit 2kg (edge feeding & edging)
  • single motor end trimming unit (edge cutting)
  • overlapping trimming unit r3 0. 55 kw
  • polishing unit (buffing)

Specifications:
feed rate 5. 5 m/1’
panel thickness 10-45 mm
min. Panel length 110 mm
min. Panel width (with min. Length 220) 60 m
min. Space between two panels 650 mm
max. Thickness of edges in rolls 3 mm
max. Thickness of edges in strips 5 mm
max edge height 50mm
work table height 850 mm
working air pressure 6 bar
total dimensions (length × depth × height) 1910×770×1230 mm
total dimensions (length × depth × height) with reel holder 2570×1050×1230 mm
weight 400 kg
total installed power 4800 w
diameter of centralized dust extraction outlet 100 mm
diameter of glue fumes extraction outlet 60 mm
all specifications, dimensions & design characteristic are subject to change without prior notice.



Multiple Boring Machine

The different models available with us include the following:

Single Unit Multiple Boring Machine
Model KI-MB-221

Specification:
ModelKI-MB-221
Spindle Numbers21 bits
Min. Distance Between Spindles32mm
Max Workpiece Width750mm
Max. Drilling Depth50mm
Main Motor Power1.5kw
Speed of Spindle2840rpm
Pressure Compressed Air0.6Mpa

All specifications, dimensions & design characteristic are subject to change without prior notice.



    Hydraulically Operated Cold Press

    We are offering a broad range of Hydraulically Operated Single Day Light Cold Press which is available in different model options. These are available in models such as KI-48A-50T/10, KI-45B-25T/10—2, KI-44-25T/10—3 and KI-48B-50T/10. These models can be customized in terms of dimension, installed power and support capacity rolling as per the requirement of clients.

    The different models available with us include the following:


    Hydraulically Operated Cold Press
    Model KI-48-80T/13

    Specifications :

    Press Board Dimension2500X1250mm
    Max. Pressure80t
    Max. Opening1300 mm
    Installed Power5.5kw
    Overall Dimension (LXWXH)3150X1300X3500mm
    Net Wt.3500kg
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    Hydraulically Operated Cold Press Model KI-44-25T/10×3

    Specifications :
    ModelKI-44-25T/10×3
    Press Board Dimension2500×1200×3mm (Steel Work Table)
    Max. Pressure25t × 3
    Max. Opening1000 mm
    Installed Power4kw
    Overall Dimension (mm) (L×W×H)3500×1250×3150
    Net Wt.4350kg
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    Spindle Moulder

    The gamut of spindle molder is available with a table height of 900mm. Our spindle molders are available in models such as T111, T111CF, TX113, TX113CF, KI-KI-SM-120, KI-SM-130T, KI-SM-130T-ST, and KI-SM-120 BT. These can also be customized in terms of motor speed, dimension, table heights and so on. The offered model range include:

    Spindle moulder with tilting spindle and sliding table ( Paoloni – Italian Make) Model TX113CF

    Specification
    Fixed Worktable Size1200 × (475+265) mm
    Usable Spindle Height d.35/30 mm – 1.25”140 mm
    Usable Spindle Height d.40/50 mm180 mm
    Table Height900 mm
    Max. Spindle Protrusion above worktable190 mm
    Spindle Speed – ? on request1300/2500/3500/5000 /6000/8500 RPM
    Spindle Tilting Range- 5o / + 45°
    Max. size of retractable tool under the table320 × 50 mm
    Main motor power4 kw (5.5HP) 50 Hz
    Noise level acc. ISO 7960 Rule – Milling work82.9 – 86.8 dB(A)
    Dust emission according to Din 33893 Rule – Milling work0.47 mg / m3
    Net Weight480 Kgs.
    Overall Dimension1200×1050×1080mm
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    Other Information

    • Packaging Details: 1



    Post Forming Machine

    We provide technologically advanced post forming machine which finds application in plywood and wood working industry. Our machine exhibits features such as high motor capacity as well as production output. Our model KI-PF-310 can be customized in form maximum workpiece length, workpiece forming height, minimum working width and maximum motor power.

    Our machine is available in the following models:

    Post Forming Machine

    • Model KI-PF-310

    Model KI-PF-270

    Specification:
    Model KI-PF-310
    Max. Workpiece Length 3100mm
    Workpiece Forming Height 12-80 mm
    Min. Working Width 200 mm
    Max Motor Power 6 kw
    Max. Heating Temperature 2100C
    Min. Entering Air Pressure 0.7Mpa
    Machine Outline Size 4200×750×1760mm
    Net Weight 1400 kg
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    Automatic M.D.F. Flooring Line Machine

    Automatic M.D.F. Flooring Line Machine
    • Model KI-MB-283A
    • Model KI-MX-2614B

    Specifications:
    Model KI-MB-283A KI-MX-2614B
    Max. Working Width 300mm 300mm
    Min. Working Width 70mm 70mm
    Max. Working Length 1800mm 1400mm
    Min. Working Length 600mm 400mm
    Feeding Speed 8-50m/min 10-40m/min
    Vertical and Click Shaft revolution 7000/6000~8000r/min 7000/6000~8000r/min
    Vertical and click shaft diameter. 40mm 40mm
    Vertical milling cutter diameter. 160~200mm 160~200mm
    Click milling cutter diameter 180mm 180mm
    Feeding rubber roller diameter 180×12 (units)  
    Vertical shaft motor power 4Kw×6 (sets) 3Kw×4 (sets)
    Click shaft motor power 2.2kw×2(sets) 2.2kw×2(sets)
    Feeding motor power 5.5kw 3 kw
    Elevatory motor power 0.75kw 0.75kw
    Lifting motor power 0.75 kw 0.75 kw (width opening motor)
    Total power 35.4 kw 20.9 kw
    Air pressure 0.3 MPa 0.6 MPa
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    Auto Feeder

    The auto feeders offered by us has high feeding speed. These are available in models such as AF-32, and AF-34. We can also customize our range in terms of feeding speed, motor capacity, and size of roller. The different varieties of models available with us are:

    Auto Feeder
    Model AF-32
    Model AF32
    Motor 1/4HP (0,188KW) 1 or 3 Phase
    Size of Roller 3 Rollers, f80x30mm
    Feeding Speed 4 Speeds, 6/8/9/13 M/min (50Hz)
    Optional Gear Set adding available speeds to 6.
    Quick Holder QH01 applicable.
    All specifications, dimensions & design characteristic are subject to change without prior notice.

    Auto Feeder
    Model AF-34
    Model AF34
    Motor 1HP (0.75KW), 1 or 3 Phase
    Size of Roller 3 Rollers, f120x60mm
    Feeding Speed 4 Speeds, 4/8/10/20 M/min
    Optional Gear Set double available speeds to 8.
    Optional speeds: 3/6/13/26 M/min.
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    Membrane Press

    Membrane Press (Vacuum Curved Surface Covering Machine)

    The gamut of Membrane Presses (Vacuum Curved Surface Covering Machine) is available in different models such as manual feeding and automatic feeding with varied dimensions. Our membrane press can also be customized in terms of power consumption, actual dimension, working plate size and others. These are available with the following models:

    Membrane Press - (Manual Feeder)

    Specification:
    Overall Dimensions5500 × 1500 × 1400 mm
    Working Plate Size2550 × 1100 (1300) mm
    General Power15 kw
    Actual Power Consumption5 kw (approx.)
    Rating Working Pressure(Negative Pressure) – 0.095 Mpa
    Weight2000 kgs
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    N° 1 Membrane Press(Simimpianti- Italian Make)

    Specification:
    Number of platens2
    Number of openingsN1
    Type of pressupstroking
    Dimensions of platensmm2500x1300
    Loading sidemm2500
    Voltage
    380/3/50
    Thickness of internal chambermm60
    Specific pressurekg/cmq6
    All specifications, dimensions & design characteristic are subject to change without prior notice.

    N° 1 Membrane Press(Simimpianti - Italian Make) Model Easypress 25.12.

    Specification:

    Number of platensN2
    Number of openingsN1
    Type of pressupstroking
    Dimensions of platensmm2500x1200
    Loading sidemm2500
    Number of traysN1
    Voltage
    380/3/50
    Specific pressurekg/cmq2
    All specifications, dimensions & design characteristic are subject to change without prior notice.

    Click PDF For

    • N° 1 Membrane press model topform (Simimpianti - Italian Make)



    Universal Tool Grinder

    The comprehensive range of Universal Tool Grinder offered by us have in them high grinding capacity. The range is available with coolant pump motor and grinding wheel motor of about 3 HP. Our tool grinders is well known for delivering optimum grinding wheel speed which is about 3400 rpm. We can also customize our range on grinding capacity, grinding wheel speed and other aspects as required by clients.

    • Universal Tool Grinder
    • Profile Grinder / Universal Tool Grinder Model BS-800

    Specifications:

    ModelBS-800
    Grinding CapacityCutter (dia. x W)203x200 mm
    Carbide saw (dia. x T)76x600 mm
    Carbide knife (LxWxH)610x76x16 mm
    Router bits (Shank)13 mm
    Grinding wheel speed3400 rpm
    Grinding wheel motor3 HP
    Coolant pump motor1/8 HP
    Machine size1200x1200x1450mm
    Packing size1500x1500x1550mm
    N.W./G.W.750/820 kgs
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    Short Cycle Lamination Hot Press

    Short Cycle Lamination Hot Press - Through Feed Hydraulic Hot Press
    We are expert in offering Short Cycle Lamination Hot Press / Through Feed Hydraulic Hot Press which is designed as per the international standards. The model KI-48B-120T/1 has high working pressure of about 120T 3.7kg/cm2 and has plate dimension of about 1300×2500×42mm. It also comes with features like high feeding speed which is of 15m/min and capability to withstand maximum temperature of about 1200 C.

    Short Cycle Lamination Hot Press / Through Feed Hydraulic Hot Press
    Model KI-48B-120T/1 Size 8’ x 4’

    Specifications :
    ModelKI-48B-120T/1
    Working Pressure120T 3.7kg/cm2
    Platen Dimension1300×2500×42mm
    Opening Between Platen250mm
    Qty and Dia of Oil Cylinder8-100 mm
    Closing Speed20-60 mm/s
    Rated Oil Pressure20Mpa
    Feeding Speed15m/min
    Max. Temperature1200C
    Heating MethodElectricity heating / Power 45kw
    Overall Dimension8500×1800×2150mm
    Machine Net Weight9T
    Installed Power10kw
    All specifications, dimensions & design characteristic are subject to change without prior notice.

    Model Available:

    • Short Cycle Lamination Hot Press / Through Feed Hydraulic Hot Press Model KI-48B-160T/1 Size 8’ x 4'


    Paper Cutting Machines

    Paper Cutting Machine Model 1370 D

    Specifications:
    Model1370 D
    Cutting Thickness160 mm
    Cutting Width1370 mm
    Front Table Length1370 mm
    Table Height840 mm
    Total Machine Length900 mm
    Machine Width2830 mm
    Machine Height3065 mm
    Electrical Supply1650 mm
    Net WeightOptional
    Blade Motor4800 kg
    Clamp Motor5 HP
    Paper Feeding Motor2 HP
    Air Table Motor1 HP
    Blade Motor1 HP
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    Multiple Boring Machine

    Item Code: KI-MB-221

    Three Head Multiple Boring Machine Model KI-MB-221×3

    Specification:

    ModelKI-MB-221x3
    Group of spindle3
    Left group1
    Vertical Spindle Group2
    Spindle63
    Left Spindle21
    Vertical spindle21x2 = 42
    Center distance between the spindle32mm
    Max panel thickness80mm
    Vertical max boring depth75mm
    Horizontal max boring depth85mm
    Max. vertical boring distance1240mm
    Min. Vertical boring distance(MZ7321A) 1700mm)
    Motor Power150mm
    Motor Power of left Group4.5kw
    Motor Power of Vertical Group1.5kw
    Working height1.5kwx2 = 3kw
    Rotation speed of the spindle860mm
    Working pneumatic power2700rpm
    Air consumption for a cycle6-8kg/cm2
    Left group of spindles32L
    Vertical group of spindles12L
    Net Weight10Lx2 = 20L
    Overall dimensions580kg(MZ7321AL,1000kg)


    Multiple Boring Machine

    Six Head Multiple Boring Machine Model KI-MB-221×6NSpecifications:

    ModelKI-MB-221×6N
    Max. Panel Width2550mm
    Min. Panel Width240 mm
    Groups of Spindle
    Left Group1
    Right Group1
    Sitting of Vertical Spindle Group4
    Vertical Spindle Group2x4 = 8
    Spindle130
    Left Group21
    Right Group21
    Vertical Spindle2x11x4 =88
    Center Distance Between The Spindles32 mm
    Max Panel Thickness80 mm
    Vertical Max Boring Depth70 mm
    Horizontal Max Boring Depth40 mm
    Max. Vertical Boring Distance2550 mm
    Min. Vertical Boring Distance170 mm
    Motor Power Of Horizontal Group2.5HP (1.85KW)
    Motor Power Of Vertical Group3HP (2.2KW)
    Feeding Speed60m/min
    Feeding Power0.5HP (0.37KW)
    Working Height915 mm
    Rotation Speed Of The Spindle2800 rpm
    Air Consumption For Single Cycle9L
    Air Consumption For Total Cycle65 L
    Net Weight2710 kg


    Manual Edge Banding Machine

    Manual Edge Banding Machine Model KI-SEB-207T

    Specification:
    Model KI-SEB-207 T
    Edge Width 10~50mm(MF80S, 10~80mm)
    Edging thickness 0.15~3mm
    Min. Working radius 20mm
    Feeding Speed 1~18m/min
    Heating Power 1.73mm
    Hydraulic Pressure 4~5kg/cm2
    Motor Power 0.2kw
    Net Weight 280kg
    Overall dimensions (LxWxH) 1500x1000x1180mm
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    Hydraulically Operated Cold Press

    Hydraulically Operated Single Day Light Cold Press Model KI-48A-50T/10

    Specifications :
    ModelKI-48A-50T/10
    Press Board Dimension2500×1250mm
    Max. Pressure50t
    Max. Opening1000 mm
    Installed Power4kw
    Roller Drive4 (4 groups) 10pcs
    Support Capacity Rolling2000 kg.
    Overall Dimension (mm) (L×W×H)3000×1250×315
    Net Wt.2850kg
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    Hydraulically Operated Cold Press

    Hydraulically Operated Single Day Light Cold Press Model KI-48B-50T/10

    Specifications :
    Model KI-48B-50T/10
    Press Board Dimension 2500×1250mm
    Max. Pressure 50t
    Max. Opening 1000 mm
    Installed Power 4kw
    Overall Dimension (mm) (L×W×H) 3000×1250×3050
    Net Wt. 2650kg
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    Hydraulically Operated Cold Press

    Hydraulically Operated Cold Press Model KI-45B-25T/10×2

    Specifications :
    ModelKI-45B-25T/10×2
    Press Board Dimension1250×1240mm×2
    Max. Pressure25t×2
    Max. Opening1000 mm
    Installed Power4kw
    Overall Dimension (mm) (L×W×H)3000×1250×3050
    Net Wt.2650kg
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    Spindle Moulder

    Spindle Moulder Model KI-SM-120

    Specifications:


    ModelKI-SM-120
    Max. Working Height120mm
    Working table size1000×650 mm
    Cutter Shenk Dia.35 mm
    Spindle Rotating Speed5000~10000r/min
    Power3kw
    Overall Size (L×W×H)1020×680×1050mm
    Net Weight365 kg

    All specifications, dimensions & design characteristic are subject to change without prior notice.


    Membrane Press

    Membrane Press - (Automatic Feeder)

    Specifications :
    Overall Dimensions5800 (8800) × 1500 × 1400 mm
    Working Plate Size2550 × 1100 (1300)mm
    General Power15 kw
    Actual Power Consumption5 kw (approx.)
    Rating Working Pressure(Negative Pressure) – 0.095 Mpa
    Weight2500 kgs
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    High Speed Router

    FC 600 VERTICAL BELT ROUTER(Paoloni–Italian Make)

    Technical Specifications:


    Worktable Dimensions650x480 mm
    Distance between Shaft and Upright600 mm
    Vertical Stroke of Shaft80 mm
    Vertical Stroke of Table160 mm
    Tool Attachment TypeMK2
    Spindle Speeds10000/20000 RPM
    Main Motor Power1.5/2kw (2/3HP) 50Hz
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    Auto Hydraulic Copy Shaping Machine

    Auto Hydraulic Copy Shaping Machine Model HH-1006A

    Specifications:
    ModelHH-1006A
    Working capacity(30-210) ×(165-1200) mm(W×L)
    Main spindle power10HP × 2
    Ravolution speed5800-6000 rpm
    Hydraulic power2HP × 1
    Power of braking motor3HP × 1
    Machine Size3600 × 1050 × 2800mm
    Measurements3700 × 1150 × 3000mm
    N.W./G.W.3000/3200kgs
    All specifications, dimensions & design characteristic are subject to change without prior notice.

    Auto Hydraulic Copy Shaping Machine
    Model HH-1006S

    Specifications:
    ModelHH-1006S
    Working capacity(30-210)×(165-1200) mm (W×L)
    Main spindle power10HP × 2
    Revolution speed5800-6000 rpm
    Hydraulic power2HP × 1
    Power of braking motor3HP × 1
    Sanding power1HP × 2
    Sanding belt size90 × 1170mm(W×L)
    Machine Size3600 × 1800 × 2800mm
    Measurements3700 × 1900 × 3120mm
    N.W./G.W.3200/3400kgs
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    Sliding Table Panel Saw with Driven Scorer

    Sliding Table Panel Saw With Driven Scorer Model-P350NX (Paoloni - Italian Make)

    Technical Specifications:


    Blade Tilting Range9º – 45º
    Max. Cutting Height with Blade at 900- 45o118-81 mm
    Max. Saw Blade Diameter / Hole350 mm
    Saw Rotation Speed3000/4600 rpm
    Max. Scoring Blade Diameter / Hole / Cutting Height120 / 20 / 6 mm
    Driven Scoring Unit Rotation Speed8000 rpm
    Scoring Motor PowerKw 0.55 (Hp 0.75)
    Upper & lower dust extraction hood dia.100 / 80 mm
    Max. Squaring Capacity with Scoring unit3350 mm
    Cutting Width on Parallel Fence1300 mm
    Main Motor Power4 kw (5.5 HP) 50Hz
    Noise Level Acc. EN27960 Standards81.2 – 83.9 dB (A)
    Max. Squaring Opening Stops3200 mm
    Dust Emission according to Din 33893 standard – cutting with saw0.87 mg. / m3
    Net Weight700Kgs
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    Electronic Beam Panel Saw

    Available Models:

    • Explorer 3200 P
    • Explorer 4300 P


    Computerised Panel Saw

    Computerized Panel Saw Over the years we have been offering a wide range of Computerized Panel Saw that are high in performance and low on maintenance. These are designed to perfection using premium quality raw material and are rigorously tested on the basis of well defined parameters. Our machines are provided in the specifications of Max. Depth of Cut 80mm* (100mm), Blade Diameter 355 (405) mm and Arbor Diameter of 1”.

    The different models available with us include:

    Computerized Panel Saw
    • Model PRO–10–CA
    • Model PRO–8–CA


      Specifications:



      PRO-8-CAPRO-10-CA
      CapacityMax. Length of Cut2650mm3250mm
      Max. Depth of Cut80mm* (100mm)80mm* (100mm)
      Main Saw BladeBlade Diameter355(405)mm?355(405)mm
      Arbor Diameter1”1”
      Speed4800 rpm4800 rpm
      Scoring Saw BladeBlade Diameter180 mm180 mm
      Arbor Diameter1”1”
      Speed6500 rpm6500 rpm
      Saw CarriageFeed Forward Speed (Variable)0-60M/min0-60M/min
      Retract Speed67 M/min67 M/min
      MotorMain Saw Blade Motor13HP*(15HP)13HP*(15HP)
      Saw Carriage drive motor2 HP2 HP
      High Pressure Blower Motor3 HP3 HP
      Automatic Feed System1 kw (AC Servo)1 kw (AC Servo)
      Automatic Panel Feed Speed0-50 M/min0-50 M/min
      Working air Pressure5-6 kg/cm25-6 kg/cm2
      Table Height from Floor820 mm820 mm
      Net Weight3600 kg3800 kg
      Machine Dimensions (L×W×H)211”×220”×60”232”×244”×60”
      All specifications, dimensions & design characteristic are subject to change without prior notice.


    Auto Panel Saw Beam Saw

    We are available with Auto Panel Saw / Beam Saw that are durable, sturdy, corrosion resistant, dimensionally accurate and easy to operate. These are fabricated using best grades of raw material and are in high demand all across the globe. These are available in different model options and specification choices including maximum length of cut, machine dimensions and others.  

    Auto Panel Saw / Beam Saw 
    • Model PRO–8
    • Model PRO–10
    • Model PRO–12

      Specifications:
      Model PRO - 8 PRO-10 PRO-12
      Max. Length of Cut 2650mm 3250mm 3850mm
      Spindle Motor 13 HP 13 HP 13 HP
      Carriage Drive 3 HP 3 HP 3HP
      Spindle Saw Blade 14” Dia 14” Dia 14” Dia
      Spindle Diameter 1” 1” 1”
      Spindle Speed 4800 rpm 4800 rpm 4800 rpm
      Pre-Scoring Saw Blade 160mm Dia 160mm Dia 160mm Dia
      Pre-Scoring Spindle Diameter 1” 1” 1”
      Pre-Scoring Spindle Speed 6500 rpm 6500 rpm 6500 rpm
      Max. Cutting, Height 80mm 80mm 80mm
      Feed Forward Speed 12-16-21-26m/min. 12-16-21-26m/min. 12-16-21-26m/min
      Retract Speed 24-32-42-52m/min. 24-32-42-52m/min. 24-32-42-52m/min
      From Floor to Table Height 820mm 820mm 820mm
      Compressed Air Required 5.5 kg/cm2 5.5 kg/cm2 5.5 kg/cm2
      Machine Net Weight 2200 kg 2400 kg 2600 kg
      Machine Dimension 5235×3350×1830 5845×3350×1830 6430×3350×1830
      Pallet Gross Weight 2600 Kg 2900 Kg 3200 Kg
      All specifications, dimensions & design characteristic are subject to change without prior notice.


    Automatic Through Feed Edge Banding

    Our team of efficient professionals enable us in offering the best range of Automatic through feed Edge Banding machines. These are precision designed and are stringently checked by our team of quality controllers. In our endeavor to attain maximum client satisfaction, we provide our gamut in customized specifications by adhering to the designs and work process needs of our clients. Our automatic through feed edge banding models includes KI-TF508C, KI-TF509, KI-TF 509 R, KI-TF 505, KI-TF 509 RM, KI-TF509-M and KI-TF360C.


    Corner Rounder

    Corner Rounder Model CR10 (Paoloni - Italian Make)

    Specifications:
    Panel thickness (min/max)10/50 mm
    Cutterhead rotation speed24000 rpm
    Pneumatic motor power0,37 Kw
    Wide (T.C.T) cutter30mm Z2 R=2mm
    Widia (T.C.T) cutter30mm Z2 R=3mm
    Extraction outlet diameter100 mm
    Compressed air(95 PSI) 6, 5 bar
    Overall dimensions780x720x1250mm
    Weight100 kg
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    Curve & Straight Edge Trimming Machine

    Curve & Straight Edge Trimming with End Cutting Arrangement

    The Curve & Straight Edge Trimming with End Cutting Arrangement machines available with us are high in performance & durability. These are available in customized form as per the specifications of our clients and are stringently checked before the final delivery. This model has a maximum thickness workpiece 40mm, maximum profiling length 100mm, rated pneumatic pressure 0.7 Mpa and working voltage of 380V.

    Curve & Straight Edge Trimming with End Cutting Arrangement


    Specification:
    Max. Thickness workpiece40mm
    Max. Profiling Length100mm
    Rated pneumatic pressure0.7 Mpa
    Working Voltage380V
    Motor Power0.37 kw
    Revolving speed of motor12000 r/min 200 hz
    The outlined size800×800×1285mm
    The total weight350 Kg.
    All specifications, dimensions & design characteristic are subject to change without prior notice.


    Universal Tool Grinder

    Universal Tool Grinder


     


    Kalyan Industries, Yamunanagar
    Mr. Jagmohan Singh (Managing Partner)
    Opposite Punjab & Sind Bank, Jagadhri Road
    Yamunanagar - 135001, Haryana, India

    Home  |  About Us  |  Our Products  |  Trade Offers (4)   |   Site Map  |   Contact Us   |   Mobile Site

    © Kalyan Industries, Yamunanagar. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited